White Waxed Gelcoat
Requires M.E.K.P Catalyst for curing.
A polyester surface coat providing a cosmetic enhancement and exposure improvements to a fiberglass laminate. All Fiber-Tek gelcoats are isophthalic resin based and are a brushing viscosity. Custom colors and special matches are available in 22kg minimum order. Requires M.E.K.P catalyst for curing.
The table below contains the catalyst chart when using MEKP to catalyze Polyester Resins & Gelcoats. The MEKP Catalyst must be used or the resin or gelcoat will not cure.
|10 ml per litre or 10 drops per oz.||30 min.||2 hr.||4 hr.||---|
|15 ml per litre or 15 drops per oz.||---||30 min.||2 hr.||4 hr.|
|20 ml per litre or 20 drops per oz.||---||---||40 min.||2 hr.|
NOTE: Working time is approximately 25% of above cure times. Avoid working in extreme temperature or direct sunlight.
WARNING: MEKP Catalyst is a hazardous substance. Use with extreme caution. Contact with eyes may cause blindness. In case of contact, flush with water, consult physician immediately. Vapour is harmful, use adequate ventilation during application.