Epoxy Resins

Requires 205 Fast Hardener, 206 Slow Hardener or 207 Special Clear Hardener. 105 Epoxy Resin is the base material on which all WEST SYSTEM 105 Syst...

Aqua Set is a specially formulated multi-purpose epoxy system, totally insensitive to moisture, that will bond and cure even underwater and at tem...

Use with 105 Resin 206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working time or a longer cure time is needed. It a...

Crystal Sheen is a two-component, smooth flowing, easily mixed epoxy polymer finish. For use on photographs, plaques, prints, signs, table and bar...

A toughened, versatile epoxy that is conveniently pre-thickened for permanent waterproof bonding of plastic, fiberglass, ceramics, metals, damp an...

Use with 105 Resin Blush-free 207 Special Clear Hardener was developed for coating and fiberglass cloth application where an exceptionally clear, m...

Used with 105 Resin 205 Fast Hardener is a medium-viscosity epoxy curing agent. It is used in a majority of bonding situations, at lower temperatur...

A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods....

Quick Cure-5 is the standard quick setting "five minute epoxy" system. Mix at a 1:1 by volume ratio. Quick Cure is ideal for all small jobs requir...

406 Colloidal Silica is an epoxy thickening additive used to control the viscosity of the epoxy and prevent epoxy runoff in vertical and overhead ...

These thin polyurethane foam covers are the only roller covers recommended for epoxy application. The thin foam allows you to control film thickne...

QuikFair is a lightweight, microballoon-filled, fast-curing two-part epoxy fairing putty with excellent moisture resistance. The two color-coded p...

Clear epoxy adhesives and coatings can be colored easily. These are concentrated pigments, dispersed in epoxy resins, which can be added in any qu...

This Static Mixer is used for the Six 10 Thickened Epoxy.

Six10® Thickened Epoxy Adhesive combines the strength and reliability and excellent physical properties of a two-part WEST SYSTEM Epoxy with point-...

410 Microlight™ is the ideal low-density filler for creating a light, easily-worked epoxy fairing compound especially suited for fairing large are...

G-2 is an excellent adhesive choice for oily, acidic hardwoods like teak and other tropical woods. Use it for gluing oak and cedar, as well as oth...

407 Low-Density filler is a blended microballoon-based filler added to epoxy resin/hardener to make fairing putties that are easy to sand or carve...

404 High-Density Adhesive Filler is an epoxy thickening additive developed for maximum physical adhesive properties in hardware bonding where high...

Quick Cure-15 will give you some additional working time over the 5-minute product. A two-component, solvent-free, epoxy/polymercaptan adhesive sy...

403 Microfibers, a fine fiber blend, is used as a thickening additive with resin/hardener to create a multi-purpose adhesive, especially for bondi...

S-1 is a two-part Clear Penetrating Epoxy Sealer. Mixed at a simple 1:1 ratio S-1 is extremely effective at prolonging the service life of all woo...

Rot Fix is an easy to use, low viscosity epoxy wood sealer, primer, and consolidant for repair and restoration of rotted, deteriorated, dried out ...

SilverTip Epoxy is a medium-low viscosity, liquid epoxy resin system that has been optimized for coating and reinforcing fabric saturation in wood-...