Skip to content
Our Jesmonite order has arrived and is finally back in stock!
Our Jesmonite order has arrived and is finally back in stock!

White Unwaxed Gelcoat

Original price $0.00 - Original price $0.00
Original price $0.00
$13.75
$13.75 - $405.70
Current price $13.75

Requires M.E.K.P Catalyst for Curing.

A polyester surface coat providing a cosmetic enhancement and exposure improvements to a fiberglass laminate.  All Fiber-Tek gelcoats are isophthalic resin based and are a brushing viscosity. Use unwaxed gelcoat if you want to put 2 coats of gelcoat on to build a thicker layer. Requires M.E.K.P catalyst for curing.

The table below contains the catalyst chart when using MEKP to catalyze Polyester Resins & Gelcoats. The MEKP Catalyst must be used or the resin or gelcoat will not cure.

CATALYST CHART

Catalyst Volume 25°C 20°C 15°C 10°C
10 ml per litre or 10 drops per oz. 30 min. 2 hr. 4 hr. ---
15 ml per litre or 15 drops per oz. --- 30 min. 2 hr. 4 hr.
20 ml per litre or 20 drops per oz. --- --- 40 min. 2 hr. 

NOTE: Working time is approximately 25% of above cure times. Avoid working in extreme temperature or direct sunlight.

WARNING: MEKP Catalyst is a hazardous substance. Use with extreme caution. Contact with eyes may cause blindness. In case of contact, flush with water, consult physician immediately. Vapour is harmful, use adequate ventilation during application.

 

Requires M.E.K.P Catalyst for Curing.

A polyester surface coat providing a cosmetic enhancement and exposure improvements to a fiberglass laminate.  All Fiber-Tek gelcoats are isophthalic resin based and are a brushing viscosity. Use unwaxed gelcoat if you want to put 2 coats of gelcoat on to build a thicker layer. Requires M.E.K.P catalyst for curing.

The table below contains the catalyst chart when using MEKP to catalyze Polyester Resins & Gelcoats. The MEKP Catalyst must be used or the resin or gelcoat will not cure.

CATALYST CHART

Catalyst Volume 25°C 20°C 15°C 10°C
10 ml per litre or 10 drops per oz. 30 min. 2 hr. 4 hr. ---
15 ml per litre or 15 drops per oz. --- 30 min. 2 hr. 4 hr.
20 ml per litre or 20 drops per oz. --- --- 40 min. 2 hr. 

NOTE: Working time is approximately 25% of above cure times. Avoid working in extreme temperature or direct sunlight.

WARNING: MEKP Catalyst is a hazardous substance. Use with extreme caution. Contact with eyes may cause blindness. In case of contact, flush with water, consult physician immediately. Vapour is harmful, use adequate ventilation during application.