Neutral Unwaxed Gelcoat
Requires M.E.K.P Catalyst for Curing.
A polyester surface coat providing a cosmetic enhancement and exposure improvements to a fiberglass laminate. All Fiber-Tek gelcoats are isophthalic resin based and are a brushing viscosity. The Neutral gelcoat has no color pigments added but with the addition of the Coast Fiber-Tek Color Pigments they can take on any color you want. Use unwaxed gelcoat if you want to put 2 coats of gelcoat on to build a thicker layer. Requires M.E.K.P catalyst for curing.
The table below contains the catalyst chart when using MEKP to catalyze Polyester Resins & Gelcoats. The MEKP Catalyst must be used or the resin or gelcoat will not cure.
|10 ml per litre or 10 drops per oz.||30 min.||2 hr.||4 hr.||---|
|15 ml per litre or 15 drops per oz.||---||30 min.||2 hr.||4 hr.|
|20 ml per litre or 20 drops per oz.||---||---||40 min.||2 hr.|
NOTE: Working time is approximately 25% of above cure times. Avoid working in extreme temperature or direct sunlight.
WARNING: MEKP Catalyst is a hazardous substance. Use with extreme caution. Contact with eyes may cause blindness. In case of contact, flush with water, consult physician immediately. Vapour is harmful, use adequate ventilation during application.