Sculpting Tools

Pore Tool #1 is our 4 pointed skin pore tool. For best results for human skin texture, place a piece of plastic wrap over the area of sculpture to...

This is a 4 double ended tool pack which consists of a Double ended large and small Flat, Double ended large and small Slant, Double ended large a...

PT2 is our 7 Pronged Skin Pore tool for larger areas. For best results for human skin texture, place a piece of plastic wrap over the area of scul...

Itty Bitty tools are for teeny tiny sculptures. They are made of very fine wire and not to be used for digging very hard surfaces. If the surface ...

Using either end of tool, always use a criss cross pattern of the desired area of sculpture, to ensure a more even surface. Remember: Rough treatm...

Jeweler Blade #1 is a single double sided rake tool with a flat and a round end. These tips are a little Larger in size than the Jeweler Blade #2 ...

This is our ST4 X-Heavy Double ended tool with a flat and round end using our heaviest Bass string. Using either end of tool, always use a criss c...

PT3 is perfect for creating the Dash type of skin pores found on the forehead and face. For best results for human skin texture, place a piece of ...

Jeweler Blade #2 is a single double sided rake tool with a flat and a round end. These tips are a little smaller in size than the Jeweler Blade #1...

Wrinkle tools are for adding realistic wrinkles to your sculpture by dragging either side across the surface to be textured. WT1 has two sides one...

Use either end of tool, always use a criss cross pattern of the desired area of sculpture to ensure a more even surface. Remember the is a finishi...

MINI SCULPTING TOOLS The mini-sculpting tools MS01 through MS12 are made from high carbon heat treated music wire. Their small size allows the art...

Set of 6 x double-ended Ball Point Tipped stylus tools for embossing patterns into clay when sculpting

22 piece sculpting tool set comes complete in Titanic FX Zip up Pouch

Wrinkle tool #2 is single sided with 6 prongs. You can quickly add lots of wrinkles to larger areas by dragging end back and forth across area to ...

CES Micro Rake 3 MR3 For Cleaning, Smoothing, Shaping and Detailing. Features: Overall lengths are approx. 5.5” (139mm) Tools ends are affixed to ...

These Crown-Punching needles from Titanic FX for punching hair into a foam, gelatin, latex or silicone masks and prosthetics.We have five different...

Easily formed and bendable aluminum artmature wire. 16mtr roll

Wrinkle tool #4 is a single sided tool with 3 prongs (.047 wire). You can quickly add lots of wrinkles to larger areas by dragging the end back an...

Using either end of tool, always use a criss cross pattern of the desired area of sculpture, to ensure a more even surface. Remember: Rough treatm...

Using either end of tool, always use a criss cross pattern of the desired area of sculpture, to ensure a more even surface. Remember: Rough treatm...

Using either end of tool, always use a criss cross pattern of the desired area of sculpture, to ensure a more even surface. Remember: Rough treatm...

CES Large Wound Wire Rake 3 WWR3 Made with high quality .080” (2mm) nickel-wound music wire ends, thick 1/4” (6.3mm) diameter brass handles wrappe...

CES Ultra Fine Micro Rake 4 - FMR4 The fine wound wires leave fewer little bits of clay needing to be removed and far fewer tool marks!  Features:...

CES Ultra Fine Micro Rake 1 - FMR1 The fine wound wires leave fewer little bits of clay needing to be removed and far fewer tool marks!  Features:...

CES Saw Rake Coarse Small CR2 For smoothing out contours after blocking out basic shapes. Features: Overall length - 6.5" 5” long sturdy metal han...

CES Micro Rake 2 MR2 For Cleaning, Smoothing, Shaping and Detailing. Features: Overall lengths are approx. 5.5” (139mm) Tools ends are affixed to ...

CES Micro Rake 1 MR1 For Cleaning, Smoothing, Shaping and Detailing. Features: Overall lengths are approx. 5.5” (139mm) Tools ends are affixed to ...

CES Ultra Fine Line Detail Tools 2 UFD2 Perfect for the finest lines, wrinkles and other small details in clay sculptures, wax, and pottery.

CES Fine Line Tool 2 SD2 This double-ended tool is great for creating fine details such as wrinkles, folds, and thin lines in clay sculptures, wax...

Various Wood / Stainless Steel sculpting tools.

Aluminum armature wire.  Semi easily bendable at this diameter

Wrinkle tool #3 is a single sided tool with 3 prongs(.025 wire). You can quickly add lots of wrinkles to larger areas by dragging the end back and...

CES Probe Tool PRT-1 Probe/pore texture tool for checking depth of clay or adding pore texture to your sculptures.

CES Wound Wire Rake 2 WWR2 Use after course and fine rakes in a cross-hatching pattern to get clay surface extra smooth. Perfect for simulating me...

CES Large Wire Loop Tool 5 LW5 Used for cutting and shaping clay sculptures and pottery. Features: 5” long sturdy metal handle Tools ends are affi...

CES Micro Rake 5 MR5 For Cleaning, Smoothing, Shaping and Detailing. Features: Overall lengths are approx. 5.5” (139mm) Tools ends are affixed to ...

Our Ultimate 24 Piece Sculpting Starter Kit comes with our biggest range of tools yet! Each set comes in their very own pouch to keep your tools sa...

Aluminum armature wire.  Sold in 10' lengths only.  Not easily shipped.

Application: Create realistic skin texture and wrinkles. Features: 3D printed design, Comes in several awesome colors: Blue,Green,Black,Red,Orange...

CES Wrapped Wire Tool ENC-1 Hand crafted Wire Wrapped Tool from Cutting Edge Sculpture for getting basic shapes and texturing clay models. Hand wr...