Orange Tooling Unwaxed Gelcoat
Requires M.E.K.P. Catalyst for curing
Black Tooling Polyester Tooling Gel Coat provides a durable surface to withstand the repeated moldings of FRP laminates. The pigmented products are formulated to be low in hide so that imperfections can be easily spotted.
This product is formulated ready-to-spray after the addition of the proper amount of an appropriate
organic peroxide catalyst.
Features and Benefits
Flexibility – Excellent for reducing cracking and crazing
Application – Easy to spray with minimal air entrapment and good air release
Sag resistance – Sprayed films resist sagging and slumping
Abrasion resistance – For long mold life
Temperature resistance – Withstands repeated molding cycles
Smoother sprayed film – For less orange peel
High gloss surface
|10 ml per litre or 10 drops per oz.||30 min.||2 hr.||4 hr.||---|
|15 ml per litre or 15 drops per oz.||---||30 min.||2 hr.||4 hr.|
|20 ml per litre or 20 drops per oz.||---||---||40 min.||2 hr.|
NOTE: Working time is approximately 25% of above cure times. Avoid working in extreme temperature or direct sunlight.
WARNING: MEKP Catalyst is a hazardous substance. Use with extreme caution. Contact with eyes may cause blindness. In case of contact, flush with water, consult physician immediately. Vapour is harmful, use adequate ventilation during application.