New products

Use with 105 Resin Blush-free 207 Special Clear Hardener was developed for coating and fiberglass cloth application where an exceptionally clear, m...

Use with 105 Resin 206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working time or a longer cure time is needed. It a...

Used with 105 Resin 205 Fast Hardener is a medium-viscosity epoxy curing agent. It is used in a majority of bonding situations, at lower temperatur...

Requires 205 Fast Hardener, 206 Slow Hardener or 207 Special Clear Hardener. 105 Epoxy Resin is the base material on which all WEST SYSTEM 105 Syst...

Non Slip Additive is a medium grade crushed walnut shell that can be added to any Resin, Gelcoat or Paint to make any area a slip proof surface.

Milled Fibers are ground fiberglass fibers. They will add moderate strength to any type of Resin or Gelcoat alone, or in combination with other fi...

Mini Fibers are ground HDPE fibers. It is an additive for all types of resins and gelcoats although, when used to thicken epoxy resins, it creates ...

Cabosil is light weight, low density fumed silica powder additive for use in all types of Resins and Gelcoats although, when used to thicken polye...

Glass bubbles is a hollow silicone dioxide powder. It is a non-absorbent additive used to extend all types of Resins and Gelcoats. it can be used ...

Industrial Talc is a magnesium hydroxide powder and is the most economical filler. It is an additive used to thicken all types of resins and gelco...

Interfibe is a treated cellulose fiber and is the replacement filler for asbestos. It is an economical additive for all types of Resins and Gelcoa...

Methyl Ethyl Ketone, or M.E.K., is similar to acetone, but stronger. It can be used for wiping down freshly sanded surfaces, but does not evaporat...

Xylene is a strong solvent used for the clean up of uncured epoxy resins, the clean up of oil and grease, the reduction of most enamel-based paint...

Methylene Chloride is a solvent used as an adhesive for acrylic sheeting as it actually melts the material together. Methylene Chloride will also ...

Styrene is a monomer used in Polyester Resin and Gelcoat manufacturing, and is used to reduce or thin these products.

Acetone is a solvent generally used for the clean up of uncured polyester resins and gelcoats and, due to it's rapid evaporation characteristics, ...

For Tinting Polyester Resin and Gelcoat These pigments are used for tinting Polyester Resin or Gelcoats. Corresponding resin to gelcoat size for pi...

For Tinting Polyester Resin and Gelcoat These pigments are used for tinting Polyester Resin or Gelcoats. Corresponding resin to gelcoat size for pi...

For Tinting Polyester Resin and Gelcoat These pigments are used for tinting Polyester Resin or Gelcoats. Corresponding resin to gelcoat size for pi...

For Tinting Polyester Resin and Gelcoat These pigments are used for tinting Polyester Resin or Gelcoats. Corresponding resin to gelcoat size for pi...

For Tinting Polyester Resin and Gelcoat These pigments are used for tinting Polyester Resin or Gelcoats. Corresponding resin to gelcoat size for pi...

For Tinting Polyester Resin and Gelcoat These pigments are used for tinting Polyester Resin or Gelcoats. Corresponding resin to gelcoat size for pi...

For Tinting Polyester Resin and Gelcoat These pigments are used for tinting Polyester Resin or Gelcoats. Corresponding resin to gelcoat size for pi...