New products

SilverTip Epoxy is a medium-low viscosity, liquid epoxy resin system that has been optimized for coating and reinforcing fabric saturation in wood-...

A workable gel with matt finish, to resemble dried and congealed blood.

A firm mouldable gel with pliable consistency. For sculpting textural wounds, or for detailing sets & costumes.

A soft gel for accentuating texture & depth in wounds and for breaking down costumes.

A brand new texture with hundreds of uses. Simply spray to deliver a jet of soft, 3-D gel blood. Amazing for instant wounds and costume dressing. ...

Perfect for art department dressing. Spray & Stay, will run - THEN SET. Drips stay in place and become rub-proof when fully dry. Finished the ...

No other blood flows as fast through tricky FX rigs. With strong colour pay-off, it wets out fabric in an instant!  Does not contain sugar syrup. ...

A thicker texture that resists flow and dries like congealing blood. SAFETY INFORMATION: Safe for use in mouth, but not intended for ingestion Avo...

If you only stock one blood, this is it!   Flows and spreads like real blood.  Dries in minutes. SAFETY INFORMATION: Safe for use in mouth, but no...

A rapid flowing blood that spreads & smears on skin and wets out fabric quickly.   Dries slowly. SAFETY INFORMATION: Safe for use in mouth, bu...

Monster Clay® Gray Premium Grade Modeling Clay is a re-useable sulfur free, professional oil/wax based sculpting medium. Composed entirely of non-...

Monster Clay® Premium Grade Modeling Clay is a re-useable sulfur free, professional oil/wax based sculpting medium. Composed entirely of non-toxic,...

Clear epoxy adhesives and coatings can be colored easily. These are concentrated pigments, dispersed in epoxy resins, which can be added in any qu...

6 x 4oz. bottles A highly concentrated latex pigment for intrinsically coloring latex polymers such as mask latex. For a very intense color, we rec...

New from the creator of Monster Clay©, BITE GEL™ is our brand new Tooth Grade Impression Alginate. Formulated for teeth models, BITE GEL™ picks up...

Texture Stamp Set #1 Our original set of stamps consisting of 12 different skin textures ranging from heavy to fine. Create realistic textures by ...

Introducing Ed and Alanna H2.0, the world's first water fillable sculpting busts from The Monster Makers. Completely reengineered and reimagined, ...

This is Monster Makers standard stearate based mold release included with every Monster Foam Latex Kit. Also, popular for use in releasing gel fil...

Keep From Freezing. Protac is Monster Makers exclusive acrylic emulsion adhesive used to adhere many types of prosthetic appliances. Pro-Tac will w...

Keep From Freezing. Used throughout the world by top industry professionals, The Monster Makers Foam Latex is unmatched for its quality, dependabil...

Keep From Freezing. A concentrated, pre-mixed paint medium developed for use on latex rubber masks and props. Features excellent coverage, super fl...

For use with a standard caulking gun. Great for injecting large amounts of epoxy, laying a lengthy bead of epoxy or making fillets. Can be refille...

A toughened, versatile epoxy that is conveniently pre-thickened for permanent waterproof bonding of plastic, fiberglass, ceramics, metals, damp an...

A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods....

This Static Mixer is used for the Six 10 Thickened Epoxy.

Six10® Thickened Epoxy Adhesive combines the strength and reliability and excellent physical properties of a two-part WEST SYSTEM Epoxy with point-...

423 Graphite Powder is a fine black powder that can be mixed with epoxy to produce a low-friction exterior coating with increased scuff resistance...

A proprietary blend designed to improve cured epoxy’s moisture exclusion effectiveness. 422 is used as a barrier coating additive to help prevent ...

410 Microlight™ is the ideal low-density filler for creating a light, easily-worked epoxy fairing compound especially suited for fairing large are...

407 Low-Density filler is a blended microballoon-based filler added to epoxy resin/hardener to make fairing putties that are easy to sand or carve...

406 Colloidal Silica is an epoxy thickening additive used to control the viscosity of the epoxy and prevent epoxy runoff in vertical and overhead ...

405 Filleting Blend Adhesive Filler is a strong, wood-toned epoxy filler for use in epoxy joints and epoxy fillets on naturally finished wood. It ...

404 High-Density Adhesive Filler is an epoxy thickening additive developed for maximum physical adhesive properties in hardware bonding where high...

403 Microfibers, a fine fiber blend, is used as a thickening additive with resin/hardener to create a multi-purpose adhesive, especially for bondi...

These thin polyurethane foam covers are the only roller covers recommended for epoxy application. The thin foam allows you to control film thickne...

300 Mini Pumps are designed for convenient and accurate metering of Group A, B, and C WEST SYSTEM 105 Resin-based epoxy. The 300 Mini Pump Set C...

Use with 105 Resin Blush-free 207 Special Clear Hardener was developed for coating and fiberglass cloth application where an exceptionally clear, m...

Use with 105 Resin 206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working time or a longer cure time is needed. It a...

Used with 105 Resin 205 Fast Hardener is a medium-viscosity epoxy curing agent. It is used in a majority of bonding situations, at lower temperatur...

Requires 205 Fast Hardener, 206 Slow Hardener or 207 Special Clear Hardener. 105 Epoxy Resin is the base material on which all WEST SYSTEM 105 Syst...

QuikFair is a lightweight, microballoon-filled, fast-curing two-part epoxy fairing putty with excellent moisture resistance. The two color-coded p...

SculpWood Putty is a two-component, solvent-free, kneadable epoxy. It is moldable, carvable, lightweight, strong, and exhibits excellent adhesion ...

Rot Fix is an easy to use, low viscosity epoxy wood sealer, primer, and consolidant for repair and restoration of rotted, deteriorated, dried out ...

Quick Cure-15 will give you some additional working time over the 5-minute product. A two-component, solvent-free, epoxy/polymercaptan adhesive sy...

Quick Cure-5 is the standard quick setting "five minute epoxy" system. Mix at a 1:1 by volume ratio. Quick Cure is ideal for all small jobs requir...

S-1 is a two-part Clear Penetrating Epoxy Sealer. Mixed at a simple 1:1 ratio S-1 is extremely effective at prolonging the service life of all woo...

G-2 is an excellent adhesive choice for oily, acidic hardwoods like teak and other tropical woods. Use it for gluing oak and cedar, as well as oth...