New products

Can be used with Jesmonite AC630, AC730 and AC830. Solvent free, stain resistant formula specifically designed to coat porous surfaces. Clear coa...

Metal fillers can be used with Jesmonite AC100, once de-moulded and dried the surface can be polished with 000 wire wool to reveal the metallic eff...

Jesmonite Thixotrope can be added to AC100, AC200 and AC300 to adjust the thickness of the mixture to the user’s preference. This is particularly u...

Iwata Part# I7041

Iwata Part #: I7011

Iwata Part #: I7012

Iwata Part Number: I6011

Mini Palette Ring Connectors sold Seperatley

38 Sections

24 sections

48 Sections

12 Sections

9 Section

16 Sections - 2 different sizes inside

6 Sections - Mini

15 Sections

5 Sections

12 Sections

24 Sections

PLEASE NOTE THAT WE ARE NOT ABLE TO SHIP JESMONITE IF THE TEMPERATURE IS BELOW FREEZING The colors Coade and Terracotta have been discontinued by J...

Jesmonite is a versatile range of water-based, solvent free composite materials ideally suited to the creation of decorative mouldings and glass re...

PLEASE NOTE THAT WE ARE NOT ABLE TO SHIP JESMONITE IF THE TEMPERATURE IS BELOW FREEZING Jesmonite Flex Metal Gel Coats are the latest development ...

High-shear Mixing Blades are essential for the proper mixing of all Jesmonite composite materials. They are specifically designed for adding Jes...

PLEASE NOTE THAT WE ARE NOT ABLE TO SHIP JESMONITE IF THE TEMPERATURE IS BELOW FREEZING Jesmonite AC730 is a rapid setting acrylic modified cementi...

1 Section

1 Section

1 Section

1 Section

2 Sections

13 Sections

2 Sections

Iwata Part no.: I6022 NOZZLE CAP ECL BS,CS/SBS .35mm

-35mm Iwata Part no.: I6172 ECL NEEDLE .35mm BS/CS/SBS   -5mm Iwata Part no.: I6171 ECL NEEDLE .5mm BCS/BCR/CR

Iwata Part no.: I6042 NOZZLE .35mm ECL BS,CS,SBS

Iwata Part no.: I6021 5mm Nozzle Cap - Eclipse  

Iwata Part no.: I6041 NOZZLE .5mm ECLIPSE

Iwata Part no.: I1401 NOZZLE CAP HP-A

Iwata Part no.: N0751

Iwata Part no.: N0801

Iwata Part no.: AS12013 Iwata 1/4" Female to Female Fitting for use with air hoses, regulators and multiple valve assemblies.

Iwata Part no.: AS12004 Iwata 2-Way Valve Assemby for custom airbrushing set-ups provides two leak proof on-off valves to split air from a single a...

Iwata Part no.: AS12005 Iwata 3-Way Valve Assemby for custom airbrushing set-ups provides three leak proof on-off valves to split air from a single...

Iwata Part no.: AS12010 Iwata 1/4 Quick Disconnect Set for use in connecting an airbrush hose to a shop compressor or regulator. Includes 1/4" male...

Iwata Part no.: AS12003 On/Off Valve is a fitting for your compressor's air output to turn your air pressure on/off quickly.  The On/Off Valve has ...

Iwata Part no.: AS12002 Iwata 1/4" Male to Female Fitting for use with air hoses, regulators and multiple valve assemblies.

Iwata Part no.: AS12001 Iwata 1/4" Male to Male Fitting for use with air hoses, regulators and multiple valve assemblies.

Iwata Part no.: MFX1 Zazzo Beauty Ensemble Template Set by Bradley M. Look consists of a stencil collection on four sheets of Mylar, which can be u...

Iwata Part no.: FHAZTFX1