New products

Need to add details to your foam armour? We have the answer for you! Our Foam Clay® starts out as a foamy putty-like clay that stretches and blend...

Hard-Lite EVA foam is the perfect high-density prop making foam! Hard-Lite EVA is incredibly durable and stiff Perfect for creating super durable ...

Form-Lite EVA foam is best for armour with compound and complex curves. Form-Lite is denser than floor mat and most other generic EVA sheet foams t...

The foamsmith's budget-friendly EVA Foam option!   Budget-friendly! Softer than our Form-Lite EVA Foam but more dense than floor mat A more eco-fri...

1-meter long half-round foam dowelling, made from high-density EVA foam. Great for rounded edge detailing! 5mm - 10mm are made of Form-Lite EVA. 15...

1-meter long round foam dowelling, made from high-density EVA foam. Suitable for all your impossible-to-cut round detailing and tubing needs. 5mm -...

Equilateral Triangle foam bevels! Made from high-density EVA foam. Great for sharp bevelled detailing on armour and props. Also makes great edges o...

Equilateral Triangle foam bevels! Made from high-density EVA foam. Great for sharp bevelled detailing on armour and props. Also makes great edges o...

Cruelty Free | Vegan | Without detergent The emollient formula of Musst Charcoal Soap quickly dissolves impurities and makeup, even the most stubbo...

Musst Brush Cleaner will ship as Dangerous Goods. PRO Brush Cleaner -No alcohol inside -Since it is mainly made of isododecane, it is highly effect...

Cinema Secrets Brush Cleaner will ship as Dangerous Goods. Original Eucalyptus Brush Cleaner -Lower concentration of isopropyl alcohol, it is gentl...

Musst Brush Cleaner will ship as Dangerous Goods. New 70+ Brush Cleaner -Higher concentration of isopropyl alcohol which allows to disinfect th...

This Honeywell 7580P100 P100 Particulate Respirator Cartridge is NIOSH approved for P100 protection (99.97 filtration of particulates)  These Hone...

Defender: Organic Vapor, Chlorine, Hydrogen Chloride, Sulfur Dioxide, Hydrogen Sulfide (Escape), Hydrogen Fluoride, Chlorine Dioxide, Ammonia, Met...

Defender: Organic Vapor, Chlorine, Hydrogen Chloride, Sulfur Dioxide, Hydrogen Sulfide (Escape), Hydrogen Fluoride, Chlorine Dioxide, Ammonia, Met...

Connects 7506N095 pre-filters to cartridge.

Package of 10 filters N95 Particulate Filter for use with North Cartridges. Requires North® N750036 Pre-Filter Retainer

Organic Vapor Cartridge. For use with 5500 & 7700 Series North Half Masks

Elastomeric half mask is the economical solution that does not skimp on features. A wide contoured sealing area provides great fit. The low “dead ...

Available in sizes S-M-L The benchmark in half masks. Made from 100% medical grade silicone, the wide sealing area provides exceptional fit and com...

Application: Create realistic skin texture and wrinkles. Features: 3D printed design, Comes in several awesome colors: Blue,Green,Black,Red,Orange...

Wrinkle tool #4 is a single sided tool with 3 prongs (.047 wire). You can quickly add lots of wrinkles to larger areas by dragging the end back an...

Wrinkle tool #3 is a single sided tool with 3 prongs(.025 wire). You can quickly add lots of wrinkles to larger areas by dragging the end back and...

Wrinkle tool #2 is single sided with 6 prongs. You can quickly add lots of wrinkles to larger areas by dragging end back and forth across area to ...

Wrinkle tools are for adding realistic wrinkles to your sculpture by dragging either side across the surface to be textured. WT1 has two sides one...

PT3 is perfect for creating the Dash type of skin pores found on the forehead and face. For best results for human skin texture, place a piece of ...

PT2 is our 7 Pronged Skin Pore tool for larger areas. For best results for human skin texture, place a piece of plastic wrap over the area of scul...

Pore Tool #1 is our 4 pointed skin pore tool. For best results for human skin texture, place a piece of plastic wrap over the area of sculpture to...

Itty Bitty tools are for teeny tiny sculptures. They are made of very fine wire and not to be used for digging very hard surfaces. If the surface ...

Use either end of tool, always use a criss cross pattern of the desired area of sculpture to ensure a more even surface. Remember the is a finishi...

Jeweler Blade #2 is a single double sided rake tool with a flat and a round end. These tips are a little smaller in size than the Jeweler Blade #1...

Jeweler Blade #1 is a single double sided rake tool with a flat and a round end. These tips are a little Larger in size than the Jeweler Blade #2 ...

Using either end of tool, always use a criss cross pattern of the desired area of sculpture, to ensure a more even surface. Remember: Rough treatm...

Using either end of tool, always use a criss cross pattern of the desired area of sculpture, to ensure a more even surface. Remember: Rough treatm...

Using either end of tool, always use a criss cross pattern of the desired area of sculpture, to ensure a more even surface. Remember: Rough treatm...

This is our ST4 X-Heavy Double ended tool with a flat and round end using our heaviest Bass string. Using either end of tool, always use a criss c...

Using either end of tool, always use a criss cross pattern of the desired area of sculpture, to ensure a more even surface. Remember: Rough treatm...

This is a 4 double ended tool pack which consists of a Double ended large and small Flat, Double ended large and small Slant, Double ended large a...

This is a 4 double ended tool pack which consists of a Double ended large and small Flat, Double ended large and small Slant, Double ended large a...

This is a 4 double ended tool pack which consists of a Double ended large and small Flat, Double ended large and small Slant, Double ended large a...

For use with a standard caulking gun. Great for injecting large amounts of epoxy, laying a lengthy bead of epoxy or making fillets. Can be refille...

A toughened, versatile epoxy that is conveniently pre-thickened for permanent waterproof bonding of plastic, fiberglass, ceramics, metals, damp an...

A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods....

This Static Mixer is used for the Six 10 Thickened Epoxy.

Six10® Thickened Epoxy Adhesive combines the strength and reliability and excellent physical properties of a two-part WEST SYSTEM Epoxy with point-...

423 Graphite Powder is a fine black powder that can be mixed with epoxy to produce a low-friction exterior coating with increased scuff resistance...

A proprietary blend designed to improve cured epoxy’s moisture exclusion effectiveness. 422 is used as a barrier coating additive to help prevent ...

410 Microlight™ is the ideal low-density filler for creating a light, easily-worked epoxy fairing compound especially suited for fairing large are...