New products

This Static Mixer is used for the Six 10 Thickened Epoxy.

Six10® Thickened Epoxy Adhesive combines the strength and reliability and excellent physical properties of a two-part WEST SYSTEM Epoxy with point-...

423 Graphite Powder is a fine black powder that can be mixed with epoxy to produce a low-friction exterior coating with increased scuff resistance...

A proprietary blend designed to improve cured epoxy’s moisture exclusion effectiveness. 422 is used as a barrier coating additive to help prevent ...

410 Microlight™ is the ideal low-density filler for creating a light, easily-worked epoxy fairing compound especially suited for fairing large are...

407 Low-Density filler is a blended microballoon-based filler added to epoxy resin/hardener to make fairing putties that are easy to sand or carve...

406 Colloidal Silica is an epoxy thickening additive used to control the viscosity of the epoxy and prevent epoxy runoff in vertical and overhead ...

405 Filleting Blend Adhesive Filler is a strong, wood-toned epoxy filler for use in epoxy joints and epoxy fillets on naturally finished wood. It ...

404 High-Density Adhesive Filler is an epoxy thickening additive developed for maximum physical adhesive properties in hardware bonding where high...

403 Microfibers, a fine fiber blend, is used as a thickening additive with resin/hardener to create a multi-purpose adhesive, especially for bondi...

These thin polyurethane foam covers are the only roller covers recommended for epoxy application. The thin foam allows you to control film thickne...

300 Mini Pumps are designed for convenient and accurate metering of Group A, B, and C WEST SYSTEM 105 Resin-based epoxy. The 300 Mini Pump Set C...

Use with 105 Resin Blush-free 207 Special Clear Hardener was developed for coating and fiberglass cloth application where an exceptionally clear, m...

Use with 105 Resin 206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working time or a longer cure time is needed. It a...

Used with 105 Resin 205 Fast Hardener is a medium-viscosity epoxy curing agent. It is used in a majority of bonding situations, at lower temperatur...

Requires 205 Fast Hardener, 206 Slow Hardener or 207 Special Clear Hardener. 105 Epoxy Resin is the base material on which all WEST SYSTEM 105 Syst...

Endura SKT (Skin Tone) Light Adjuster The EBA Light Skin Tones consist of five light skin tones, one lightest neutral skin shade and four adjuster...

The Endura SKT makeup is an excellent choice for applications that require extreme durability in extreme conditions such as humidity, rain and und...

ENDURA FACEOFF - SFX The Endura Face Off edition consists of alcohol based makeup formulated with the same properties and qualities as EBA’s origi...

ENDURA FACEOFF - UNDEAD The Endura Face Off edition consists of alcohol based makeup formulated with the same properties and qualities as EBA’s or...

This series uses colors N1, C1 and C2 for the SKT Series Category The Endura Contour FX edition consists of alcohol based makeup formulated with th...

The ENDURA AUTOPSY SERIES consists of alcohol based makeup formulated with the same properties and qualities as EBA’s original Endura brand makeup...

Add Thinner to Silabond adhesive at 10:1 ratio (Silabond:Thinner) or as desired. Adding SB Thinner to Silabond will reduce drying time.

Silabond Matte is the matte version of EBA’s renowned Silabond silicone-based adhesive. This adhesive provides a non-shiny finish and strong instan...