New products

Endura HAIR and BEARD is a highly pigmented alcohol-based liquid makeup delivering instant color, water-resistant application and fast drying formu...

Silabond Matte is the matte version of EBA’s renowned Silabond silicone-based adhesive. This adhesive provides a non-shiny finish and strong instan...

Endura HAIR and BEARD is a highly pigmented alcohol based liquid makeup delivering instant color, a water resistant application and fast drying tim...

The Hair and Beard Master Alcohol Activated Palette includes the following colors: Papyrus, Ashes, Auburn, Mud, Flax, Taupe, Clay, Tobacco, Black c...

NEW! SKIN DEEP DARK PAINT 1oz 10 PACKWHAT’S INCLUDED• 10 Endura SKT Skin Tone Shades• N8, C9, W10, N10, C10, W11, C11, N12, C12, W12Endura SKIN Dee...

EBA Master Alcohol Activated Palettes are the perfect solution when space is limited and yet more color choices are desirable. EBA Master Alcohol P...

Fab-Tone colors are highly concentrated and should be used in small amounts. They mix into the latex extremely well to give brilliant shades and hues.

PLEASE NOTE THAT WE ARE NOT ABLE TO SHIP LATEX IF THE TEMPERATURE IS BELOW FREEZING HX-Cosmetic Latex is a natural latex compound that can be used ...

PLEASE NOTE THAT WE ARE NOT ABLE TO SHIP LATEX IF THE TEMPERATURE IS BELOW FREEZING HX-407™ Pourable Mask Making Latex is a pre-vulcanized, pourabl...

PLEASE NOTE THAT WE ARE NOT ABLE TO SHIP LATEX IF THE TEMPERATURE IS BELOW FREEZING HX-80 Brushable Mold Making Latex is a vulcanizable, low viscos...

Encore alcohol activated palette refills come prefilled, perfectly dried and ready to go. Each container comes with maximum product and color load ...

Encore alcohol activated palette refills come prefilled, perfectly dried and ready to go. Each container comes with maximum product and color load ...

Iwata Part# I7041

Iwata Part #: I7011

Iwata Part #: I7012

Iwata Part Number: I6011

The Arkhitect Spaceship model kit is inspired by the Iwata HP-C Plus airbrush and is the first in the Dream Gear series. This 1/3000 scale model is...

A workable gel with matt finish, to resemble dried and congealed blood.

A firm mouldable gel with pliable consistency. For sculpting textural wounds, or for detailing sets & costumes.

A soft gel for accentuating texture & depth in wounds and for breaking down costumes.

A brand new texture with hundreds of uses. Simply spray to deliver a jet of soft, 3-D gel blood. Amazing for instant wounds and costume dressing. ...

Perfect for art department dressing. Spray & Stay, will run - THEN SET. Drips stay in place and become rub-proof when fully dry. Finished the ...

No other blood flows as fast through tricky FX rigs. With strong colour pay-off, it wets out fabric in an instant!  Does not contain sugar syrup. ...

A thicker texture that resists flow and dries like congealing blood. SAFETY INFORMATION: Safe for use in mouth, but not intended for ingestion Avo...

If you only stock one blood, this is it!   Flows and spreads like real blood.  Dries in minutes. SAFETY INFORMATION: Safe for use in mouth, but no...

A rapid flowing blood that spreads & smears on skin and wets out fabric quickly.   Dries slowly. SAFETY INFORMATION: Safe for use in mouth, bu...

Encore alcohol activated palette refills come prefilled, perfectly dried and ready to go. Each container comes with maximum product and color load...

Encore alcohol activated palette refills come prefilled, perfectly dried and ready to go. Each container comes with maximum product and color load...

Encore alcohol activated palette refills come prefilled, perfectly dried and ready to go. Each container comes with maximum product and color load ...

Iwata Part no.: I6022 NOZZLE CAP ECL BS,CS/SBS .35mm

-35mm Iwata Part no.: I6172 ECL NEEDLE .35mm BS/CS/SBS   -5mm Iwata Part no.: I6171 ECL NEEDLE .5mm BCS/BCR/CR

Iwata Part no.: I6042 NOZZLE .35mm ECL BS,CS,SBS

Iwata Part no.: I6021 5mm Nozzle Cap - Eclipse  

Iwata Part no.: I6041 NOZZLE .5mm ECLIPSE

Iwata Part no.: I1401 NOZZLE CAP HP-A

Iwata Part no.: N0751

Iwata Part no.: N0801

Iwata Part no.: AS12013 Iwata 1/4" Female to Female Fitting for use with air hoses, regulators and multiple valve assemblies.

Iwata Part no.: AS12004 Iwata 2-Way Valve Assemby for custom airbrushing set-ups provides two leak proof on-off valves to split air from a single a...

Iwata Part no.: AS12005 Iwata 3-Way Valve Assemby for custom airbrushing set-ups provides three leak proof on-off valves to split air from a single...

Iwata Part no.: AS12010 Iwata 1/4 Quick Disconnect Set for use in connecting an airbrush hose to a shop compressor or regulator. Includes 1/4" male...

Iwata Part no.: AS12003 On/Off Valve is a fitting for your compressor's air output to turn your air pressure on/off quickly.  The On/Off Valve has ...

Iwata Part no.: AS12002 Iwata 1/4" Male to Female Fitting for use with air hoses, regulators and multiple valve assemblies.

Iwata Part no.: AS12001 Iwata 1/4" Male to Male Fitting for use with air hoses, regulators and multiple valve assemblies.

Iwata Part no.: MFX2 Zazzo Character Troupe Template Set by Bradley M. Look allows you to create character effects in special effects airbrushed ma...

Iwata Part no.: MFX1 Zazzo Beauty Ensemble Template Set by Bradley M. Look consists of a stencil collection on four sheets of Mylar, which can be u...

Iwata Part no.: FHAZTFX1

Iwata Part no.: FHSFX1