New products

CES Saw Rakes Fine Set RS-3 Set of two hand-crafted fine saw rakes  for sculpting/clay modeling. Used specifically for quickly smoothing surfaces ...

CES Saw Rakes Coarse Set RS-2 Set of 2 hand-crafted coarse saw rakes for sculpting/clay modeling. Used specifically for quickly smoothing surfaces...

CES Saw Rakes Set RS-1 Saw Rakes are the fastest way to smooth out contours after blocking out basic shapes. Set of four hand-crafted rakes for sc...

For the third installment in our Signature Series, Cutting Edge Sculpture worked with F/X Artist Maestro TIM GORE! These tools each have a unique ...

Cutting Edge Sculpture worked with two-time Emmy nominated Special Make-Up Effects Artist Mike Spatola to create a tool set to his specifications ...

Cutting Edge Sculpture has worked closely with practical effects industry legend Steve Wang to faithfully reproduce his favorite sculpting tool de...

Application: Create realistic skin texture and wrinkles. Features: 3D printed design, Comes in several awesome colors: Blue,Green,Black,Red,Orange...

Wrinkle tool #4 is a single sided tool with 3 prongs (.047 wire). You can quickly add lots of wrinkles to larger areas by dragging the end back an...

Wrinkle tool #3 is a single sided tool with 3 prongs(.025 wire). You can quickly add lots of wrinkles to larger areas by dragging the end back and...

Wrinkle tool #2 is single sided with 6 prongs. You can quickly add lots of wrinkles to larger areas by dragging end back and forth across area to ...

Wrinkle tools are for adding realistic wrinkles to your sculpture by dragging either side across the surface to be textured. WT1 has two sides one...

PT3 is perfect for creating the Dash type of skin pores found on the forehead and face. For best results for human skin texture, place a piece of ...

PT2 is our 7 Pronged Skin Pore tool for larger areas. For best results for human skin texture, place a piece of plastic wrap over the area of scul...

Pore Tool #1 is our 4 pointed skin pore tool. For best results for human skin texture, place a piece of plastic wrap over the area of sculpture to...

Itty Bitty tools are for teeny tiny sculptures. They are made of very fine wire and not to be used for digging very hard surfaces. If the surface ...

Use either end of tool, always use a criss cross pattern of the desired area of sculpture to ensure a more even surface. Remember the is a finishi...

Jeweler Blade #2 is a single double sided rake tool with a flat and a round end. These tips are a little smaller in size than the Jeweler Blade #1...

Jeweler Blade #1 is a single double sided rake tool with a flat and a round end. These tips are a little Larger in size than the Jeweler Blade #2 ...

Using either end of tool, always use a criss cross pattern of the desired area of sculpture, to ensure a more even surface. Remember: Rough treatm...

Using either end of tool, always use a criss cross pattern of the desired area of sculpture, to ensure a more even surface. Remember: Rough treatm...

Using either end of tool, always use a criss cross pattern of the desired area of sculpture, to ensure a more even surface. Remember: Rough treatm...

This is our ST4 X-Heavy Double ended tool with a flat and round end using our heaviest Bass string. Using either end of tool, always use a criss c...

Using either end of tool, always use a criss cross pattern of the desired area of sculpture, to ensure a more even surface. Remember: Rough treatm...

This is a 4 double ended tool pack which consists of a Double ended large and small Flat, Double ended large and small Slant, Double ended large a...

This is a 4 double ended tool pack which consists of a Double ended large and small Flat, Double ended large and small Slant, Double ended large a...

This is a 4 double ended tool pack which consists of a Double ended large and small Flat, Double ended large and small Slant, Double ended large a...

Iwata Part no.: I6022 NOZZLE CAP ECL BS,CS/SBS .35mm

-35mm Iwata Part no.: I6172 ECL NEEDLE .35mm BS/CS/SBS   -5mm Iwata Part no.: I6171 ECL NEEDLE .5mm BCS/BCR/CR

Iwata Part no.: I6042 NOZZLE .35mm ECL BS,CS,SBS

Iwata Part no.: I6021 5mm Nozzle Cap - Eclipse  

Iwata Part no.: I6041 NOZZLE .5mm ECLIPSE

Iwata Part no.: I1401 NOZZLE CAP HP-A

Iwata Part no.: N0751

Iwata Part no.: N0801

Iwata Part no.: AS12013 Iwata 1/4" Female to Female Fitting for use with air hoses, regulators and multiple valve assemblies.

Iwata Part no.: AS12004 Iwata 2-Way Valve Assemby for custom airbrushing set-ups provides two leak proof on-off valves to split air from a single a...

Iwata Part no.: AS12005 Iwata 3-Way Valve Assemby for custom airbrushing set-ups provides three leak proof on-off valves to split air from a single...

Iwata Part no.: AS12010 Iwata 1/4 Quick Disconnect Set for use in connecting an airbrush hose to a shop compressor or regulator. Includes 1/4" male...

Iwata Part no.: AS12003 On/Off Valve is a fitting for your compressor's air output to turn your air pressure on/off quickly.  The On/Off Valve has ...

Iwata Part no.: AS12002 Iwata 1/4" Male to Female Fitting for use with air hoses, regulators and multiple valve assemblies.

Iwata Part no.: AS12001 Iwata 1/4" Male to Male Fitting for use with air hoses, regulators and multiple valve assemblies.

Iwata Part no.: MFX2 Zazzo Character Troupe Template Set by Bradley M. Look allows you to create character effects in special effects airbrushed ma...

Iwata Part no.: MFX1 Zazzo Beauty Ensemble Template Set by Bradley M. Look consists of a stencil collection on four sheets of Mylar, which can be u...

Iwata Part no.: FHAZTFX1

Iwata Part no.: FHSFX1

Iwata Part no.: FHTFX2

Iwata Part no.: FHTFX1

Iwata Part no.: CL500E Iwata Zippered Airbrush Case keeps your airbrushes, tools and accessories organized. Holds up to 6 airbrush and includes an ...