New products

The original Proclean. A gentle oily remover, perfect for use with adhesive, prosthetics & appliances as well as make-up products. Using a bru...

Developed to create professional BALD CAPS and work as an encapsulator for the fast production of prosthetics, by using this product it will enable...

Super BALDIEZ ® edges can be blended into the skin using IPA in the same way other bald caps plastic use Acetone. It is more stretchy and snappier ...

Pearlescent and metallic base colors that spray semi-opaque out-of-the-bottle, with a 0.5mm airbrush tip-size. Thin with 4011 Reducer for increase...

Pearlescent and metallic base colors that spray semi-opaque out-of-the-bottle, with a 0.5mm airbrush tip-size. Thin with 4011 Reducer for increase...

Pearlescent and metallic base colors that spray semi-opaque out-of-the-bottle, with a 0.5mm airbrush tip-size. Thin with 4011 Reducer for increase...

Pearlescent and metallic base colors that spray semi-opaque out-of-the-bottle, with a 0.5mm airbrush tip-size. Thin with 4011 Reducer for increase...

Pearlescent and metallic base colors that spray semi-opaque out-of-the-bottle, with a 0.5mm airbrush tip-size. Thin with 4011 Reducer for increase...

Pearlescent and metallic base colors that spray semi-opaque out-of-the-bottle, with a 0.5mm airbrush tip-size. Thin with 4011 Reducer for increase...

Pearlescent and metallic base colors that spray semi-opaque out-of-the-bottle, with a 0.5mm airbrush tip-size. Thin with 4011 Reducer for increase...

Pearlescent and metallic base colors that spray semi-opaque out-of-the-bottle, with a 0.5mm airbrush tip-size. Thin with 4011 Reducer for increase...

Pearlescent and metallic base colors that spray semi-opaque out-of-the-bottle, with a 0.5mm airbrush tip-size. Thin with 4011 Reducer for increase...

Graphic colors made with a durable, acrylic – urethane resin, that cover and adhere well to difficult substrates such as plastic. Spray out-of-the...

Graphic colors made with a durable, acrylic – urethane resin, that cover and adhere well to difficult substrates such as plastic. Spray out-of-the...

This Honeywell 7580P100 P100 Particulate Respirator Cartridge is NIOSH approved for P100 protection (99.97 filtration of particulates)  These Hone...

Defender: Organic Vapor, Chlorine, Hydrogen Chloride, Sulfur Dioxide, Hydrogen Sulfide (Escape), Hydrogen Fluoride, Chlorine Dioxide, Ammonia, Met...

Defender: Organic Vapor, Chlorine, Hydrogen Chloride, Sulfur Dioxide, Hydrogen Sulfide (Escape), Hydrogen Fluoride, Chlorine Dioxide, Ammonia, Met...

Connects 7506N095 pre-filters to cartridge.

Package of 10 filters N95 Particulate Filter for use with North Cartridges. Requires North® N750036 Pre-Filter Retainer

Organic Vapor Cartridge. For use with 5500 & 7700 Series North Half Masks

Elastomeric half mask is the economical solution that does not skimp on features. A wide contoured sealing area provides great fit. The low “dead ...

Available in sizes S-M-L The benchmark in half masks. Made from 100% medical grade silicone, the wide sealing area provides exceptional fit and com...

Application: Create realistic skin texture and wrinkles. Features: 3D printed design, Comes in several awesome colors: Blue,Green,Black,Red,Orange...

Wrinkle tool #4 is a single sided tool with 3 prongs (.047 wire). You can quickly add lots of wrinkles to larger areas by dragging the end back an...

Wrinkle tool #3 is a single sided tool with 3 prongs(.025 wire). You can quickly add lots of wrinkles to larger areas by dragging the end back and...

Wrinkle tool #2 is single sided with 6 prongs. You can quickly add lots of wrinkles to larger areas by dragging end back and forth across area to ...

Wrinkle tools are for adding realistic wrinkles to your sculpture by dragging either side across the surface to be textured. WT1 has two sides one...

PT3 is perfect for creating the Dash type of skin pores found on the forehead and face. For best results for human skin texture, place a piece of ...

PT2 is our 7 Pronged Skin Pore tool for larger areas. For best results for human skin texture, place a piece of plastic wrap over the area of scul...

Pore Tool #1 is our 4 pointed skin pore tool. For best results for human skin texture, place a piece of plastic wrap over the area of sculpture to...

Itty Bitty tools are for teeny tiny sculptures. They are made of very fine wire and not to be used for digging very hard surfaces. If the surface ...

Use either end of tool, always use a criss cross pattern of the desired area of sculpture to ensure a more even surface. Remember the is a finishi...

Jeweler Blade #2 is a single double sided rake tool with a flat and a round end. These tips are a little smaller in size than the Jeweler Blade #1...

Jeweler Blade #1 is a single double sided rake tool with a flat and a round end. These tips are a little Larger in size than the Jeweler Blade #2 ...

Using either end of tool, always use a criss cross pattern of the desired area of sculpture, to ensure a more even surface. Remember: Rough treatm...

Using either end of tool, always use a criss cross pattern of the desired area of sculpture, to ensure a more even surface. Remember: Rough treatm...

Using either end of tool, always use a criss cross pattern of the desired area of sculpture, to ensure a more even surface. Remember: Rough treatm...

This is our ST4 X-Heavy Double ended tool with a flat and round end using our heaviest Bass string. Using either end of tool, always use a criss c...

Using either end of tool, always use a criss cross pattern of the desired area of sculpture, to ensure a more even surface. Remember: Rough treatm...

This is a 4 double ended tool pack which consists of a Double ended large and small Flat, Double ended large and small Slant, Double ended large a...

This is a 4 double ended tool pack which consists of a Double ended large and small Flat, Double ended large and small Slant, Double ended large a...

This is a 4 double ended tool pack which consists of a Double ended large and small Flat, Double ended large and small Slant, Double ended large a...

The standard dilutant for Createx Colors paints. Water-based paint material containing 2-Butoxy Ethanol. Medium temperature: best used 60 – 80⁰ F ...

Bloodline Flexible Adhesion Promoter: A water-based primer for painting on latex masks so paint will not chip, crack or peel off. May be applied a...

Lifeline are flesh-toned colors, created to compliment Bloodline, for more natural-looking applications. Lifeline, made with the same resin as Ill...

Lifeline are flesh-toned colors, created to compliment Bloodline, for more natural-looking applications. Lifeline, made with the same resin as Ill...

Lifeline are flesh-toned colors, created to compliment Bloodline, for more natural-looking applications. Lifeline, made with the same resin as Ill...