New products

The largest Forever Puff made specifically for body makeup application Designed with a concave area for hand placement and movement control for m...

Medium sized and most versatile Forever Puff Half circle shape at one end designed to protect the skin and prevent fall out during eyeshadow appl...

Triangular shaped medium sized Puff designed for artists and makeup lovers who are used to working with round shaped puffs It's unique shape give...

The Original and second smallest Puff, egg shaped Smaller then the Trio, the Ovo is designed for small and hard to reach places including the inn...

Smallest Forever Puff designed specifically for the compact Reduces bacteria from your compact to your skin Easy to clean. Hand wash gently or pl...

(2/pack) Designed to slide onto your finger to reduce contamination and protects the model/actor/client’s skin Prevents makeup from being disturb...

Fab-Tone colors are highly concentrated and should be used in small amounts. They mix into the latex extremely well to give brilliant shades and hues.

PLEASE NOTE THAT WE ARE NOT ABLE TO SHIP LATEX IF THE TEMPERATURE IS BELOW FREEZING HX-Cosmetic Latex is a natural latex compound that can be used ...

PLEASE NOTE THAT WE ARE NOT ABLE TO SHIP LATEX IF THE TEMPERATURE IS BELOW FREEZING HX-407™ Pourable Mask Making Latex is a pre-vulcanized, pourabl...

PLEASE NOTE THAT WE ARE NOT ABLE TO SHIP LATEX IF THE TEMPERATURE IS BELOW FREEZING HX-80 Brushable Mold Making Latex is a vulcanizable, low viscos...

Iwata Part# I7041

Iwata Part #: I7011

Iwata Part #: I7012

Iwata Part Number: I6011

Description Stretchlon® 200 vacuum bag film is a high elongation elastomeric film which can be used for cures up to 250°F (121°C) and debulking...

Description Wrightlon® 5400 is a nylon bagging film with good elongation for cure temperatures up to 356°F (180°C). Benefits • Inexpensive...

Description Econoweave® 44 is a recycled polyester breather for room temperature and elevated temperature cures. Econoweave® breathers are desi...

Description Econolease is a silicone treated nylon peel ply which provides greater release in difficult environments.Our Econo peel plies are d...

Description AT-200Y is an economical multi-purpose sealant tape with high tack. It removes easily from metal or composite tools. Suitable for c...

The Arkhitect Spaceship model kit is inspired by the Iwata HP-C Plus airbrush and is the first in the Dream Gear series. This 1/3000 scale model is...

Le Beau Touché is a sulfur-free, extremely smooth, flexible and tacky sculpting Fine Art Plasteline with exceptional adhesive quality. Available ...

NSP is a sulfur-free, somewhat tougher, waxier, sculpting Plasteline, used widely in Fine Arts and Special Effects. Can be melted and poured at ap...

NSP is a sulfur-free, somewhat tougher, waxier, sculpting Plasteline, used widely in Fine Arts and Special Effects. Can be melted and poured at ap...

Monu-Melt™ brings all of the qualities of Clayette – a sulfur-free, nonhardening, tack-free, odor-free, and flexible clay – into a formula that ca...

Iwata Part no.: I6022 NOZZLE CAP ECL BS,CS/SBS .35mm

-35mm Iwata Part no.: I6172 ECL NEEDLE .35mm BS/CS/SBS   -5mm Iwata Part no.: I6171 ECL NEEDLE .5mm BCS/BCR/CR

Iwata Part no.: I6042 NOZZLE .35mm ECL BS,CS,SBS

Iwata Part no.: I6021 5mm Nozzle Cap - Eclipse  

Iwata Part no.: I6041 NOZZLE .5mm ECLIPSE

Iwata Part no.: I1401 NOZZLE CAP HP-A

Iwata Part no.: N0751

Iwata Part no.: N0801

Iwata Part no.: AS12013 Iwata 1/4" Female to Female Fitting for use with air hoses, regulators and multiple valve assemblies.

Iwata Part no.: AS12004 Iwata 2-Way Valve Assemby for custom airbrushing set-ups provides two leak proof on-off valves to split air from a single a...

Iwata Part no.: AS12005 Iwata 3-Way Valve Assemby for custom airbrushing set-ups provides three leak proof on-off valves to split air from a single...

Iwata Part no.: AS12010 Iwata 1/4 Quick Disconnect Set for use in connecting an airbrush hose to a shop compressor or regulator. Includes 1/4" male...