Mould Making/Sculpting

CES Large Wound Wire Rake 3 WWR3 Made with high quality .080” (2mm) nickel-wound music wire ends, thick 1/4” (6.3mm) diameter brass handles wrappe...

CES Ultra Fine Micro Rake 4 - FMR4 The fine wound wires leave fewer little bits of clay needing to be removed and far fewer tool marks!  Features:...

CES Ultra Fine Line Detail Tools 2 UFD2 Perfect for the finest lines, wrinkles and other small details in clay sculptures, wax, and pottery.

CES Ultra Fine Micro Rakes Set FMRS-1 Achieve your greatest level of fine details in your sculpture with this hand crafted set of 5 Ultra-Fine Mic...

CES Saw Rakes Set RS-1 Saw Rakes are the fastest way to smooth out contours after blocking out basic shapes. Set of four hand-crafted rakes for sc...

Perfect when making silicone appliances, NEXUS is a bond enhancer designed to keep silicone materials from delaminating against their encapsulant.

WS-Series Matting Powder is a unique blend of water-based matting agents designed to eliminate the shine from painted silicone surfaces, resulting...

Platinum Silicone Cure Accelerator Plat-Cat® Platinum Silicone Cure Accelerator is an additive designed to accelerate the cure time of Smooth-On pl...

Easily formed and bendable aluminum artmature wire. 16mtr roll

Sculpting Enhancement Fluid for Free Form SCULPT Free Form® Detailer is a low viscosity liquid that makes adding details and detail effects to the ...

UV Resistance Enhancer Permanent UV stability in liquid urethane products is not possible. Ultimately, the only option is to delay the degrading ef...

For “Cold Casting” "Cold-Casting" is a term used to describe the process of mixing metal powder with a resin and applying the mixture into a mold. ...

Wrinkle tool #4 is a single sided tool with 3 prongs (.047 wire). You can quickly add lots of wrinkles to larger areas by dragging the end back an...

Using either end of tool, always use a criss cross pattern of the desired area of sculpture, to ensure a more even surface. Remember: Rough treatm...

Using either end of tool, always use a criss cross pattern of the desired area of sculpture, to ensure a more even surface. Remember: Rough treatm...

Using either end of tool, always use a criss cross pattern of the desired area of sculpture, to ensure a more even surface. Remember: Rough treatm...

CES Brass Twist Rake BT-1 Twisted Brass Square tool for shaping and raking.

CES Saw Rake Fine Large FR1 For smoothing out contours after blocking out basic shapes. Features: Overall length - 7.25" 5” long sturdy metal hand...

CES Saw Rake Coarse Small CR2 For smoothing out contours after blocking out basic shapes. Features: Overall length - 6.5" 5” long sturdy metal han...

CES Saw Rake Coarse Large CR1 For Cleaning, Smoothing, Shaping and Detailing. Features: Overall lengths are approx. 5.5” (139mm) Tools ends are af...

CES Micro Rake 5 MR5 For Cleaning, Smoothing, Shaping and Detailing. Features: Overall lengths are approx. 5.5” (139mm) Tools ends are affixed to ...

CES Micro Rake 2 MR2 For Cleaning, Smoothing, Shaping and Detailing. Features: Overall lengths are approx. 5.5” (139mm) Tools ends are affixed to ...

CES Micro Rake 1 MR1 For Cleaning, Smoothing, Shaping and Detailing. Features: Overall lengths are approx. 5.5” (139mm) Tools ends are affixed to ...