Mould Making/Sculpting

Water Bases Concrete Release Agent AquaCon® is a water based concrete release agent that aids in releasing concrete castings from Smooth-On rubber ...

Monster Clay® Gray Premium Grade Modeling Clay is a re-useable sulfur free, professional oil/wax based sculpting medium. Composed entirely of non-t...

Paste Wax Sealing Agent Sonite® Wax is a soft paste wax suitable for sealing porous surfaces prior to applying Smooth-On mold rubber. Sonite® Wax w...

PMC®-770 is a Shore 70A addition to our line of industrial liquid rubber products (such as PMC®-780 and PMC®-790) used for a variety industrial an...

Pore Tool #1 is our 4 pointed skin pore tool. For best results for human skin texture, place a piece of plastic wrap over the area of sculpture to...

This is a 4 double ended tool pack which consists of a Double ended large and small Flat, Double ended large and small Slant, Double ended large a...

This clay has been specifically formulated to be a very smooth slow drying clay for modeling. It is used primarily by design studios and the entert...

Release Cream for Body Double Body Double® Release Cream is a non-toxic skin conditioner that will aid in releasing Body Double® mold rubber from s...

Dry Gas Blanket XTEND-IT® is a dry gas blanket designed to extend the shelf life of unused moisture sensitive polyurethane products. Applying the X...

Mix & Apply-by-Hand Platinum Mold Putty Equinox® Silicone Putty Products are new silicone compounds (platinum catalyst) that can be easily mixe...

Fiber-Reinforced “Non-Sag” Life Casting Alginate Crystalline Silica Free (non-carcinogenic)   Alja-Safe® Acrobat® is a fiber reinforced "non-sag" v...

PLEASE NOTE THAT WE ARE NOT ABLE TO SHIP LATEX IF THE TEMPERATURE IS BELOW FREEZING HX-407™ Pourable Mask Making Latex is a pre-vulcanized, pourabl...

This is a 4 double ended tool pack which consists of a Double ended large and small Flat, Double ended large and small Slant, Double ended large a...

PLEASE NOTE THAT WE ARE NOT ABLE TO SHIP JESMONITE IF THE TEMPERATURE IS BELOW FREEZING Jesmonite Flex Metal Gel Coats are the latest development ...

UreCoat® is a two component urethane (A+B) that can be mixed and brushed onto a variety of surfaces to provide a flexible, tough and impact resist...

Comes with: Trial Kit OOMOO® Molding Rubber Trial Kit Smooth-Cast® 300 Casting Resin 2 oz. Superseal® Ease Release® 205 Release Agent How-To Bookl...

PT2 is our 7 Pronged Skin Pore tool for larger areas. For best results for human skin texture, place a piece of plastic wrap over the area of scul...

Itty Bitty tools are for teeny tiny sculptures. They are made of very fine wire and not to be used for digging very hard surfaces. If the surface ...

BondFX is a unique two part platinum silicone coating that can be brushed or sprayed over tin based silicones, rendering the surface compatible wi...

Impact Resistant EPS Foam Coating Epsilon™ PRO is a thixotropic epoxy coating that self-thickens for brushing onto a variety of surfaces.  Compared...

For “Cold Casting” "Cold-Casting" is a term used to describe the process of mixing metal powder with a resin and applying the mixture into a mold. ...

Using either end of tool, always use a criss cross pattern of the desired area of sculpture, to ensure a more even surface. Remember: Rough treatm...