Mould Making/Sculpting

PLEASE NOTE THAT WE ARE NOT ABLE TO SHIP JESMONITE IF THE TEMPERATURE IS BELOW FREEZING Jesmonite Flex Metal Gel Coats are the latest development ...

PMC®-790 is a Shore 90A industrial urethane rubber compound designed to meet the most stringent requirements of industrial production applications...

Silicone Prosthetic Adhesive Derma-tac™ silicone prosthetic adhesive is a pressure sensitive adhesive designed for temporarily adhering silicone an...

Fiber-Reinforced “Non-Sag” Life Casting Alginate Crystalline Silica Free (non-carcinogenic)   Alja-Safe® Acrobat® is a fiber reinforced "non-sag" v...

Smooth-Cast® 380 is a filled, high density casting resin formulated for a variety of tooling applications. This no-odor resin features a convenien...

Low Viscosity Silicone Solvent NOVOCS™ solvents are low viscosity silicone solvents that evaporate quickly. NOVOCS™ is particulary useful in thinn...

This clay has been specifically formulated to be a very smooth slow drying clay for modeling. It is used primarily by design studios and the entert...

For “Cold Casting” "Cold-Casting" is a term used to describe the process of mixing metal powder with a resin and applying the mixture into a mold. ...

For “Cold Casting” "Cold-Casting" is a term used to describe the process of mixing metal powder with a resin and applying the mixture into a mold. ...

PT3 is perfect for creating the Dash type of skin pores found on the forehead and face. For best results for human skin texture, place a piece of ...

Itty Bitty tools are for teeny tiny sculptures. They are made of very fine wire and not to be used for digging very hard surfaces. If the surface ...

Jeweler Blade #2 is a single double sided rake tool with a flat and a round end. These tips are a little smaller in size than the Jeweler Blade #1...

Jeweler Blade #1 is a single double sided rake tool with a flat and a round end. These tips are a little Larger in size than the Jeweler Blade #2 ...

Using either end of tool, always use a criss cross pattern of the desired area of sculpture, to ensure a more even surface. Remember: Rough treatm...

PMC®-746 was developed to make molds for casting gypsum plasters. This product is well suited for use as a rubber case mold – especially large cas...

TELESIS 8 SILICONE ADHESIVE is the newest addition to the evolution of the Telesis silicone adhesives  line - the most popular and widely used adh...

BondFX is a unique two part platinum silicone coating that can be brushed or sprayed over tin based silicones, rendering the surface compatible wi...

Keep From Freezing. Used throughout the world by top industry professionals, The Monster Makers Foam Latex is unmatched for its quality, dependabil...

PLEASE NOTE THAT WE ARE NOT ABLE TO SHIP LATEX IF THE TEMPERATURE IS BELOW FREEZING HX-407™ Pourable Mask Making Latex is a pre-vulcanized, pourabl...

Wrinkle tools are for adding realistic wrinkles to your sculpture by dragging either side across the surface to be textured. WT1 has two sides one...

SilicONE Adhesive technology in a spray formulation. Great for quick fixes or for large area coverage, this is what you'll want in your kit. No br...

Bald Cap Plastic Q-Ballz™ is a single component liquid that can be used as a bald cap plastic or for encapsulating silicone gel prosthetic applianc...

Low Viscosity Silicone Solvent NOVOCS™ solvents are low viscosity silicone solvents that evaporate quickly. NOVOCS™ is particulary useful in thinni...

Add Thinner to Silabond adhesive at 10:1 ratio (Silabond:Thinner) or as desired. Adding SB Thinner to Silabond will reduce drying time.

Easy bending aluminum armature wire.  100mtr roll

Non-Aerosol Pressure Sprayer The Kwikee® sprayer is an economical alternative to aerosols for dispensing release agents and sealing agents. It is a...

For “Cold Casting” "Cold-Casting" is a term used to describe the process of mixing metal powder with a resin and applying the mixture into a mold. ...

Wrinkle tool #2 is single sided with 6 prongs. You can quickly add lots of wrinkles to larger areas by dragging end back and forth across area to ...

Use either end of tool, always use a criss cross pattern of the desired area of sculpture to ensure a more even surface. Remember the is a finishi...

This is our ST4 X-Heavy Double ended tool with a flat and round end using our heaviest Bass string. Using either end of tool, always use a criss c...

CES Saw Rakes Set RS-1 Saw Rakes are the fastest way to smooth out contours after blocking out basic shapes. Set of four hand-crafted rakes for sc...

Platinum Silicone Cure Retarder SLO-JO® Platinum Silicone Cure Retarder is an additive designed to extend the pot life (working time) of Smooth-On ...

SFX-Series Platinum Silicone Pigments are specially designed to intrinsically colour your silicone pieces. Mixing a few drops of these pigments di...

Silabond Matte is the matte version of EBA’s renowned Silabond silicone-based adhesive. This adhesive provides a non-shiny finish and strong instan...

Tin Cure Silicone Accelerator Accel-T® is a one-component additive that will reduce the cure time of Smooth-On tin cure silicone rubber compounds, ...

PLEASE NOTE THAT WE ARE NOT ABLE TO SHIP LATEX IF THE TEMPERATURE IS BELOW FREEZING HX-Cosmetic Latex is a natural latex compound that can be used ...

Easily formed and bendable aluminum artmature wire. 16mtr roll

Sculpting Enhancement Fluid for Free Form SCULPT Free Form® Detailer is a low viscosity liquid that makes adding details and detail effects to the ...

UV Resistance Enhancer Permanent UV stability in liquid urethane products is not possible. Ultimately, the only option is to delay the degrading ef...

Wrinkle tool #4 is a single sided tool with 3 prongs (.047 wire). You can quickly add lots of wrinkles to larger areas by dragging the end back an...