Mould Making/Sculpting

For “Cold Casting” "Cold-Casting" is a term used to describe the process of mixing metal powder with a resin and applying the mixture into a mold. ...

Derma-tac Adhesive Remover Derma‑tac™ Remover is an easy-to-use one component liquid that will dissolve Derma‑tac™ and aid in removing appliances f...

PT3 is perfect for creating the Dash type of skin pores found on the forehead and face. For best results for human skin texture, place a piece of ...

PMC®-746 was developed to make molds for casting gypsum plasters. This product is well suited for use as a rubber case mold – especially large cas...

F-Series colours have been developed with special-FX artists, silicone sculptors, and doll artisans in mind. They contain a higher concentration o...

Low Viscosity Silicone Solvent NOVOCS™ solvents are low viscosity silicone solvents that evaporate quickly. NOVOCS™ is particulary useful in thinn...

Jeweler Blade #2 is a single double sided rake tool with a flat and a round end. These tips are a little smaller in size than the Jeweler Blade #1...

Smooth-Cast® 380 is a filled, high density casting resin formulated for a variety of tooling applications. This no-odor resin features a convenien...

Mineral Filled Urethane Casting Resin Smooth-Cast® 385 is a mineral filled urethane casting resin that is very hard and durable. When Parts A and B...

Keep From Freezing. Used throughout the world by top industry professionals, The Monster Makers Foam Latex is unmatched for its quality, dependabil...

Add Thinner to Silabond adhesive at 10:1 ratio (Silabond:Thinner) or as desired. Adding SB Thinner to Silabond will reduce drying time.

Hydrocal® FGR 95 is a fast-setting gypsum cement designed for strong, resilient glass-reinforced product fabrication. Superior fire retardant prope...

PMC®-744 has been used for years by mold making professionals to cast plaster, concrete, resins, etc. It is excellent for making molds that are st...

TELESIS 8 SILICONE ADHESIVE is the newest addition to the evolution of the Telesis silicone adhesives  line - the most popular and widely used adh...

Bald Cap Plastic Q-Ballz™ is a single component liquid that can be used as a bald cap plastic or for encapsulating silicone gel prosthetic applianc...

Low Viscosity Silicone Solvent NOVOCS™ solvents are low viscosity silicone solvents that evaporate quickly. NOVOCS™ is particulary useful in thinni...

Tin Cure Silicone Accelerator Accel-T® is a one-component additive that will reduce the cure time of Smooth-On tin cure silicone rubber compounds, ...

For “Cold Casting” "Cold-Casting" is a term used to describe the process of mixing metal powder with a resin and applying the mixture into a mold. ...

Wrinkle tools are for adding realistic wrinkles to your sculpture by dragging either side across the surface to be textured. WT1 has two sides one...

Use either end of tool, always use a criss cross pattern of the desired area of sculpture to ensure a more even surface. Remember the is a finishi...

MINI SCULPTING TOOLS The mini-sculpting tools MS01 through MS12 are made from high carbon heat treated music wire. Their small size allows the art...