Skip to content
As Canada prepares to host matches for the FIFA World Cup 2026, we would like to inform you of potential shipping disruptions in selected areas due to road closures, increased traffic, security measures, and event-related restrictions.
As Canada prepares to host matches for the FIFA World Cup 2026, we would like to inform you of potential shipping disruptions in selected areas due to road closures, increased traffic, security measures, and event-related restrictions.
Mold Max 14NV

Mold Max 14NV & 29NV

by Smooth-On Inc
Save up to $7.60 Save $-26.75
$43.75 - $144.40
$144.40
$171.15
$36.15 - $176.10
$171.15

Mold Max™ 14NV and 29NV are tin-catalyzed silicone rubbers that offer low viscosity, fast cure and long library life. Mold Max™ 14NV and 29NV do not require vacuum degassing. Mix ratio is 100A:10B by weight. Pot life is 40 minutes. Cure time of 14NV is 4 hours and the 29NV is 6 hours at room temperature.  Mold Max™ 14NV and 29NV will reproduce the finest detail and are suitable for a variety of industrial and art related applications including making molds for reproducing prototypes, furniture, sculpture and architectural elements. Cure time can be reduced with Accel-T™ cure accelerator. Mold Max™ 14NV and 29NV can be used to cast a variety of materials including wax, gypsum, low melt alloys/metals and urethane, epoxy or polyester resins. Important; Do not cast concrete into rubber molds made with this product. Concrete will not cure properly and inhibition will result.
Important; you must weigh Part A & B components using a gram scale to be successful with Mold Max™ 14NV and 29NV.

 

Mold Max™ 14NV and 29NV are tin-catalyzed silicone rubbers that offer low viscosity, fast cure and long library life. Mold Max™ 14NV and 29NV do not require vacuum degassing. Mix ratio is 100A:10B by weight. Pot life is 40 minutes. Cure time of 14NV is 4 hours and the 29NV is 6 hours at room temperature.  Mold Max™ 14NV and 29NV will reproduce the finest detail and are suitable for a variety of industrial and art related applications including making molds for reproducing prototypes, furniture, sculpture and architectural elements. Cure time can be reduced with Accel-T™ cure accelerator. Mold Max™ 14NV and 29NV can be used to cast a variety of materials including wax, gypsum, low melt alloys/metals and urethane, epoxy or polyester resins. Important; Do not cast concrete into rubber molds made with this product. Concrete will not cure properly and inhibition will result.
Important; you must weigh Part A & B components using a gram scale to be successful with Mold Max™ 14NV and 29NV.