Fiberglass & Glues

407 Low-Density filler is a blended microballoon-based filler added to epoxy resin/hardener to make fairing putties that are easy to sand or carve...

For Tinting Polyester Resin and Gelcoat These pigments are used for tinting Polyester Resin or Gelcoats. Corresponding resin to gelcoat size for pi...

Requires M.E.K.P. Catalyst for curing. A polyester surface coat providing a cosmetic enhancement and exposure improvements to a fiberglass laminate...

The Fiberglass Drip Flashing is used when fiberglassing a sundeck. It is put around the edge of the sundeck to help with keeping moisture away fro...

Requires M.E.K.P Catalyst for Curing A fire retardant resin which exhibits excellent corrosion resistance in acidic and oxidizing environments. Gen...

Mix & Apply-By-Hand Epoxy Dough Free Form® Habitat® Black Epoxy Putty is a mix-by-hand putty that is used to create textured or highly detailed...

Unidirectional Carbon Fiber is a type of composite reinforcement with all the carbon fibers aligned in the same direction. Unidirectional reinforce...

423 Graphite Powder is a fine black powder that can be mixed with epoxy to produce a low-friction exterior coating with increased scuff resistance...

Xylene is a strong solvent used for the clean up of uncured epoxy resins, the clean up of oil and grease, the reduction of most enamel-based paint...

Kevlar® is a high strength (5 times that of steel), high modulus (75% of carbon fiber) aramid fiber. Aramid is technically an aromatic polyamide, ...

Fire Safe Mix & Apply-By-Hand Epoxy Dough Free Form® Habitat® Fire Safe® epoxy putty is a high density epoxy sculpting putty that is flame rate...

405 Filleting Blend Adhesive Filler is a strong, wood-toned epoxy filler for use in epoxy joints and epoxy fillets on naturally finished wood. It ...

For “Cold Casting” "Cold-Casting" is a term used to describe the process of mixing metal powder with a resin and applying the mixture into a mold. ...

Royal JeL-E is an excellent water based mold release developed especially for casting silicone into silicone. This unique solution is applied by l...

SculpWood Putty is a two-component, solvent-free, kneadable epoxy. It is moldable, carvable, lightweight, strong, and exhibits excellent adhesion ...

A proprietary blend designed to improve cured epoxy’s moisture exclusion effectiveness. 422 is used as a barrier coating additive to help prevent ...

CarbonFoam PVC80 lightweight, closed cell, polymer foam that is non-friable, contains no CFC’s, provides excellent resistance to chemicals, and has...

High Gloss Clear Coating and Encapsulant Tarbender® is a UV resistant clear liquid epoxy that can be poured over a variety of surfaces to provide a...

HYPER-FOLIC® Release Additive is a non-toxic, skin conditioning liquid that is mixed with Body Double® silicone mold rubber prior to applying rubb...