Fiberglass & Glues

Milled Fibers are ground fiberglass fibers. They will add moderate strength to any type of Resin or Gelcoat alone, or in combination with other fi...

Requires M.E.K.P Catalyst for Curing. A polyester surface coat providing a cosmetic enhancement and exposure improvements to a fiberglass laminate....

Requires M.E.K.P. Catalyst for curing Black Tooling Polyester Tooling Gel Coat provides a durable surface to withstand the repeated moldings of FRP...

For Tinting Polyester Resin and Gelcoat These pigments are used for tinting Polyester Resin or Gelcoats. Corresponding resin to gelcoat size for pi...

Glass bubbles is a hollow silicone dioxide powder. It is a non-absorbent additive used to extend all types of Resins and Gelcoats. it can be used ...

Industrial Talc is a magnesium hydroxide powder and is the most economical filler. It is an additive used to thicken all types of resins and gelco...

Non Slip Additive is a medium grade crushed walnut shell that can be added to any Resin, Gelcoat or Paint to make any area a slip proof surface.

For Tinting Polyester Resin and Gelcoat These pigments are used for tinting Polyester Resin or Gelcoats. Corresponding resin to gelcoat size for pi...

Requires M.E.K.P Catalyst for Curing. A polyester surface coat providing a cosmetic enhancement and exposure improvements to a fiberglass laminate....

Requires M.E.K.P. Catalyst for Curing An unwaxed orthophthalic polyester water clear casting resin designed for applications in which extreme clari...

Requires M.E.K.P. Catalyst for curing. A polyester surface coat providing a cosmetic enhancement and exposure improvements to a fiberglass laminate...

406 Colloidal Silica is an epoxy thickening additive used to control the viscosity of the epoxy and prevent epoxy runoff in vertical and overhead ...

Comes with BPO Cream Hardener for curing. Feather-rite® Quality Lightweight Autobody Filler.  USC's best-selling lightweight body repair filler wit...

These thin polyurethane foam covers are the only roller covers recommended for epoxy application. The thin foam allows you to control film thickne...

Cobalt 12% is used as an additive to speed up both gel time and cure time of polyester resin and gelcoat, but not to the same extent of Promoter "...

Requires M.E.K.P. Catalyst for Curing An unwaxed epoxy-based vinyl ester resin designed to provide superior toughness and high corrosion resistance...

For Tinting Polyester Resin and Gelcoat These pigments are used for tinting Polyester Resin or Gelcoats. Corresponding resin to gelcoat size for pi...

Methyl Ethyl Ketone, or M.E.K., is similar to acetone, but stronger. It can be used for wiping down freshly sanded surfaces, but does not evaporat...

For Tinting Polyester Resin and Gelcoat These pigments are used for tinting Polyester Resin or Gelcoats. Corresponding resin to gelcoat size for pi...

For Tinting Polyester Resin and Gelcoat These pigments are used for tinting Polyester Resin or Gelcoats. Corresponding resin to gelcoat size for pi...

Six10® Thickened Epoxy Adhesive combines the strength and reliability and excellent physical properties of a two-part WEST SYSTEM Epoxy with point-...

This Static Mixer is used for the Six 10 Thickened Epoxy.

410 Microlight™ is the ideal low-density filler for creating a light, easily-worked epoxy fairing compound especially suited for fairing large are...

404 High-Density Adhesive Filler is an epoxy thickening additive developed for maximum physical adhesive properties in hardware bonding where high...