Fiberglass & Glues

Flocking powder is made up of masses of tiny fibers. The flocking powder adheres to an adhesive or sticky surface such as glue or an adhesive powd...

These uniquely designed ribbed rollers are essential for quality fiberglassing work. Once the actual fiberglass is saturated, the material is then...

Requires 205 Fast Hardener, 206 Slow Hardener or 207 Special Clear Hardener. 105 Epoxy Resin is the base material on which all WEST SYSTEM 105 Syst...

Orders of 1 to 4 yards will be folded for shipping. 1708 Biaxial is a fiberglass composite composed of 17 oz. biaxial (± 45deg) unwoven roving stit...

Flocking powder is made up of masses of tiny fibers. The flocking powder adheres to an adhesive or sticky surface such as glue or an adhesive powd...

Purchases from 1 to 3 yards will be folded for shipping. A chopped strand reinforcing material composed of chopped fiberglass of various lengths ra...

6oz E-Glass cloth is woven from fine yarns of twist and ply construction with the actual glass being a lime-alumina borosilicate glass of low alka...

An additive used to convert unwaxed polyester resins and gelcoats into a waxed product, enabling them to cure to a hard, tack-free surface. Ratio ...

6oz E-Glass cloth is woven from fine yarns of twist and ply construction with the actual glass being a lime-alumina borosilicate glass of low alka...

Orders from 1 to 4 yards will be folded for shipping. E-Glass cloth is woven from fine yarns of twist and ply construction with the actual glass be...

1/4"Chopped Strand is actual strands of fiberglass chopped into 1/4" lengths. It can be added to any type of Resin or Gelcoat alone or in combinat...

Carbon Fiber is a graphite fabric especially designed for use in laminates which have critical requirements for maximum stiffness, extremely high ...

Use with 105 Resin 206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working time or a longer cure time is needed. It a...

For Tinting Polyester Resin and Gelcoat These pigments are used for tinting Polyester Resin or Gelcoats. Corresponding resin to gelcoat size for pi...

Water-based, environmentally friendly fast-cut compounds and polish for composites and other surfaces. Used to remove scratches and polish composi...

Carbon Fiber is a graphite fabric especially designed for use in laminates which have critical requirements for maximum stiffness, extremely high ...

Used with 105 Resin 205 Fast Hardener is a medium-viscosity epoxy curing agent. It is used in a majority of bonding situations, at lower temperatur...

Orders of 1-4 yards will be folded for shipping. 6oz E-Glass cloth is woven from fine yarns of twist and ply construction with the actual glass bei...

Purchases from 1 to 3 yards will be folded for shipping. A chopped strand reinforcing material composed of chopped fiberglass of various lengths ra...

Crystal Sheen is a two-component, smooth flowing, easily mixed epoxy polymer finish. For use on photographs, plaques, prints, signs, table and bar...

Use with 105 Resin Blush-free 207 Special Clear Hardener was developed for coating and fiberglass cloth application where an exceptionally clear, m...

A chopped strand reinforcing material composed of chopped fiberglass of various lengths randomly dispersed to provide equal distribution in all di...

Orders of 1-4 yards will be folded for shipping. 6oz E-Glass cloth is woven from fine yarns of twist and ply construction with the actual glass bei...

A toughened, versatile epoxy that is conveniently pre-thickened for permanent waterproof bonding of plastic, fiberglass, ceramics, metals, damp an...

Kevlar® is a high strength (5 times that of steel), high modulus (75% of carbon fiber) aramid fiber. Aramid is technically an aromatic polyamide, ...

A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods....

Purchases from 1 to 3 yards will be folded for shipping. A chopped strand reinforcing material composed of chopped fiberglass of various lengths ra...

Purchases from 1 to 3 yards will be folded for shipping. A chopped strand reinforcing material composed of chopped fiberglass of various lengths ra...

Order from 1-4 yards will be folded for shipping. 2.5oz E-Glass cloth is woven from fine yarns of twist and ply construction with the actual glass ...

Orders from 1-4 yards will be folded for shipping. Surface mat is manufactured similar in appearance to the chopped strand mat but is much finer. i...

Orders from 1 to 4 yards will  be folded for shipping. Style 1080 fiberglass cloth is a 1.43 oz/sq yd plain weave E-glass fabric referred to as the...

Orders of 1-4 yards will be folded for shipping. 6oz E-Glass cloth is woven from fine yarns of twist and ply construction with the actual glass bei...

406 Colloidal Silica is an epoxy thickening additive used to control the viscosity of the epoxy and prevent epoxy runoff in vertical and overhead ...

Carbon Fiber is a graphite fabric especially designed for use in laminates which have critical requirements for maximum stiffness, extremely high ...

These thin polyurethane foam covers are the only roller covers recommended for epoxy application. The thin foam allows you to control film thickne...

Kevlar® is a high strength (5 times that of steel), high modulus (75% of carbon fiber) aramid fiber. Aramid is technically an aromatic polyamide, ...

Carbon Fiber is a graphite fabric especially designed for use in laminates which have critical requirements for maximum stiffness, extremely high ...

TR Hi-Temp wax is formulated to work well with heat accelerated applications. Breaks down and applies like TR-102 Regular Mold Release. Again, all...

Orders of 1-4 yards will be folded for shipping. 10oz E-Glass cloth is woven from fine yarns of twist and ply construction with the actual glass be...

Orders of 1-4 yards will be folded for shipping. 10oz E-Glass cloth is woven from fine yarns of twist and ply construction with the actual glass be...

Six10® Thickened Epoxy Adhesive combines the strength and reliability and excellent physical properties of a two-part WEST SYSTEM Epoxy with point-...

This Static Mixer is used for the Six 10 Thickened Epoxy.

410 Microlight™ is the ideal low-density filler for creating a light, easily-worked epoxy fairing compound especially suited for fairing large are...

404 High-Density Adhesive Filler is an epoxy thickening additive developed for maximum physical adhesive properties in hardware bonding where high...

Orders of 1 to 4 yards will be folded for shipping. Woven Roving is strands of glass fiber grouped together to form a twisted yarn. The roving is t...

407 Low-Density filler is a blended microballoon-based filler added to epoxy resin/hardener to make fairing putties that are easy to sand or carve...

Purchases from 1 to 3 yards will be folded for shipping. A chopped strand reinforcing material composed of chopped fiberglass of various lengths ra...

Orders of 1 to 4 yards will be folded for shipping. Woven Roving is strands of glass fiber grouped together to form a twisted yarn. The roving is t...