Products

Wrinkle tool #4 is a single sided tool with 3 prongs (.047 wire). You can quickly add lots of wrinkles to larger areas by dragging the end back an...

Itty Bitty tools are for teeny tiny sculptures. They are made of very fine wire and not to be used for digging very hard surfaces. If the surface ...

Jeweler Blade #1 is a single double sided rake tool with a flat and a round end. These tips are a little Larger in size than the Jeweler Blade #2 ...

Jeweler Blade #2 is a single double sided rake tool with a flat and a round end. These tips are a little smaller in size than the Jeweler Blade #1...

Use either end of tool, always use a criss cross pattern of the desired area of sculpture to ensure a more even surface. Remember the is a finishi...

Pore Tool #1 is our 4 pointed skin pore tool. For best results for human skin texture, place a piece of plastic wrap over the area of sculpture to...

PT2 is our 7 Pronged Skin Pore tool for larger areas. For best results for human skin texture, place a piece of plastic wrap over the area of scul...

PT3 is perfect for creating the Dash type of skin pores found on the forehead and face. For best results for human skin texture, place a piece of ...

This is a 4 double ended tool pack which consists of a Double ended large and small Flat, Double ended large and small Slant, Double ended large a...

This is a 4 double ended tool pack which consists of a Double ended large and small Flat, Double ended large and small Slant, Double ended large a...

This is a 4 double ended tool pack which consists of a Double ended large and small Flat, Double ended large and small Slant, Double ended large a...

This is our ST4 X-Heavy Double ended tool with a flat and round end using our heaviest Bass string. Using either end of tool, always use a criss c...

Using either end of tool, always use a criss cross pattern of the desired area of sculpture, to ensure a more even surface. Remember: Rough treatm...

Using either end of tool, always use a criss cross pattern of the desired area of sculpture, to ensure a more even surface. Remember: Rough treatm...

Using either end of tool, always use a criss cross pattern of the desired area of sculpture, to ensure a more even surface. Remember: Rough treatm...

Using either end of tool, always use a criss cross pattern of the desired area of sculpture, to ensure a more even surface. Remember: Rough treatm...

Wrinkle tool #3 is a single sided tool with 3 prongs(.025 wire). You can quickly add lots of wrinkles to larger areas by dragging the end back and...

Wrinkle tools are for adding realistic wrinkles to your sculpture by dragging either side across the surface to be textured. WT1 has two sides one...

Wrinkle tool #2 is single sided with 6 prongs. You can quickly add lots of wrinkles to larger areas by dragging end back and forth across area to ...

Application: Create realistic skin texture and wrinkles. Features: 3D printed design, Comes in several awesome colors: Blue,Green,Black,Red,Orange...

Manufacturer SKU: 14659-0 The D220R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure 1-50 PSI depend...

Manufacturer SKU: 14967-6 The DC600R airbrush compressor With tank and case is perfect for any hobby or artist airbrush. The maximum operating pres...

Manufacturer SKU: 13519-8 The D3000R airbrush compressor with tank is perfect for any hobby or artist airbrush. The maximum operating pressure will...

Manufacturer SKU: 13095-7 The D500SR airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about ...

Manufacturer SKU: 02103-3 10 ft Braided air hose with couplings. The coupling at the airbrush end is fitted with an O-Ring to prevent air leaks. 10...

Manufacturer SKU: 02104-0 10 ft Braided air hose with (MT )Moisture Trap and couplings. The coupling at the airbrush end is fitted with an O-Ring (...

Manufacturer SKU: 02110-1 20 ft Braided air hose with couplings. The coupling at the airbrush end is fitted with an O-Ring to prevent air leaks. 10...

Manufacturer SKU: 16070-1 The D850R airbrush compressor with tank is perfect for any hobby or artist airbrush as well as people using smaller touch...

Manufacturer SKU: 14053-6 7 piece airbrush cleaning kit. Can be used to clean any airbrush. Part Number: AC-7

Manufacturer SKU: 05537-3 Adapter.  Paasche hose to Masters and Iwata compressors. 1/4 NPT male to 1/8 BSP female. Part Number: HF-116

Manufacturer SKU: 14378-0 2 oz. (85.2 ml) Airbrush Lubricant Part Number: AL-2

Manufacturer SKU: 11903-7 Airbrush Quick Disconnect. Fast release of connection of Paasche Airbrush to air hose. Fits between Paasche hose and Paas...

Adaptor. Converts A-1/8 inch Air Hose for use With 62-1-3 or 62-2-3, 3 oz Sprayers.

Manufacturer SKU: 12999-9 Deluxe Airbrush Hanger. Can hold up to 4 airbrushes at one time. Good for any airbrush brand. The adjustable clamp fits t...

Manufacturer SKU: 00029-8 H#3L Single Action – External Mix – Siphon Feed Airbrush: This single action airbrush features a chrome plated body for d...

Manufacturer SKU: 05383-6 1 oz. glass bottle assembly for H airbrush Part Number: H-1-OZ