An Unwaxed isophthalic polyester laminating resin which exhibits high heat distortion ideal for fiberglass mold making, outstanding corrosion resistance and physical properties. (Check chemical environment before choosing a resin.)
Requires M.E.K.P. Catalyst for Curing
The table below contains the catalyst chart when using MEKP to catalyze Polyester Resins & Gelcoats. The MEKP Catalyst must be used or the resin or gelcoat will not cure.
|10 ml per litre or 10 drops per oz.||30 min.||2 hr.||4 hr.||—|
|15 ml per litre or 15 drops per oz.||—||30 min.||2 hr.||4 hr.|
|20 ml per litre or 20 drops per oz.||—||—||40 min.||2 hr.|
NOTE: Working time is approximately 25% of above cure times. Avoid working in extreme temperature or direct sunlight.
WARNING: MEKP Catalyst is a hazardous substance. Use with extreme caution. Contact with eyes may cause blindness. In case of contact, flush with water, consult physician immediately. Vapour is harmful, use adequate ventilation during application.