• White Unwaxed Gelcoat
  • White Unwaxed Gelcoat 250ml
  • White Unwaxed Gelcoat 500ml
  • White Unwaxed Gelcoat 1 Liter
  • White Unwaxed Gelcoat 3.7 Liter

White Unwaxed Gelcoat

$11.60$278.90

Requires M.E.K.P Catalyst for Curing.

Clear
Compare

Description

A polyester surface coat providing a cosmetic enhancement and exposure improvements to a fiberglass laminate.  All Fiber-Tek gelcoats are isophthalic resin based and are a brushing viscosity. Use unwaxed gelcoat if you want to put 2 coats of gelcoat on to build a thicker layer. Requires M.E.K.P catalyst for curing.

The table below contains the catalyst chart when using MEKP to catalyze Polyester Resins & Gelcoats. The MEKP Catalyst must be used or the resin or gelcoat will not cure.

CATALYST CHART

Catalyst Volume25°C20°C15°C10°C
10 ml per litre or 10 drops per oz.30 min.2 hr.4 hr.
15 ml per litre or 15 drops per oz.30 min.2 hr.4 hr.
20 ml per litre or 20 drops per oz.40 min.2 hr. 

NOTE: Working time is approximately 25% of above cure times. Avoid working in extreme temperature or direct sunlight.

WARNING: MEKP Catalyst is a hazardous substance. Use with extreme caution. Contact with eyes may cause blindness. In case of contact, flush with water, consult physician immediately. Vapour is harmful, use adequate ventilation during application.

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download & Print [82.77 KB]

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download & Print [414.80 KB]