{"title":"Epoxy Resins","description":"","products":[{"product_id":"g-2-epoxy-glue","title":"G-2 Epoxy Glue","description":"\n\u003cp\u003eG-2 is an excellent adhesive choice for oily, acidic hardwoods like teak and other tropical woods. Use it for gluing oak and cedar, as well as other materials that are difficult to bond. G-2 was developed primarily for waterproof bonding of rot-resistant woods used in fine yacht joinery. Use G-2 for both interior and exterior applications as well as below the waterline. G-2 can be mixed in small or large batches, has a long pot life and cures overnight. No clamping pressure is required. After fully curing it can be machined, drilled, sanded and tapped.\u003c\/p\u003e","brand":"System Three Resins","offers":[{"title":"12oz.","offer_id":40874320232612,"sku":"03010","price":44.8,"currency_code":"CAD","in_stock":true},{"title":"1.5 Pint","offer_id":40874320265380,"sku":"03011","price":66.4,"currency_code":"CAD","in_stock":false},{"title":"1.5 Quart","offer_id":40874320298148,"sku":"03012","price":109.4,"currency_code":"CAD","in_stock":true},{"title":"1.5 Gallon","offer_id":40874320330916,"sku":"03014","price":392.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/8528\/4772\/products\/G2-1.5QT.jpg?v=1630608978"},{"product_id":"s-1-epoxy-sealer","title":"S-1 Epoxy Sealer","description":"\n\u003cp\u003eS-1 is a two-part Clear Penetrating Epoxy Sealer. Mixed at a simple 1:1 ratio S-1 is extremely effective at prolonging the service life of all woods, concrete, metals and fiberglass reinforced polyester.\u003c\/p\u003e\n\u003cp\u003eS-1 is ready to use with no thinning required. It displays excellent wetting properties on most surfaces. S-1 has a long pot life and can be applied with a brush, roller or spray equipment. It is completely waterproof and suitable for use above or below the waterline. S-1 is a superb undercoat primer for most paints and clear finishes featuring strong adhesion to most substrates with minimal surface preparation.\u003c\/p\u003e\n\u003cp\u003eS-1 does not require sanding between coats if recoat time is less than 24 hours. It is resistant to salt air, mild acids, alkalis, chemicals and solvents. S-1 is not recommended for gas tanks containing unleaded gasoline.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSimple 1:1 mix ratio\u003c\/li\u003e\n\u003cli\u003eReady-to-use viscosity, no thinning required\u003c\/li\u003e\n\u003cli\u003eExcellent wetting properties on most surfaces\u003c\/li\u003e\n\u003cli\u003eApplies by brush, roller, or spray\u003c\/li\u003e\n\u003cli\u003eLong pot life\u003c\/li\u003e\n\u003cli\u003eWaterproof\u003c\/li\u003e\n\u003cli\u003eStrong adhesion to most substrates with minimal surface preparation\u003c\/li\u003e\n\u003cli\u003eNon-brittle even at extremely low temperatures\u003c\/li\u003e\n\u003cli\u003eNo sanding required between coats up to 24 hours\u003c\/li\u003e\n\u003cli\u003eResistant to salt air and water, and mild acids, alkalis, chemicals and solvents (Not unleaded gasoline-proof).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"System Three Resins","offers":[{"title":"2 Quart Kit","offer_id":40874320494756,"sku":"03020","price":168.6,"currency_code":"CAD","in_stock":false},{"title":"2 Gallon Kit","offer_id":40874320527524,"sku":"03021","price":478.2,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/8528\/4772\/products\/S1_2Qt_Kit.jpg?v=1630608985"},{"product_id":"quick-cure-5","title":"Quick Cure-5","description":"\n\u003cp\u003eQuick Cure-5 is the standard quick setting \"five minute epoxy\" system. Mix at a 1:1 by volume ratio. Quick Cure is ideal for all small jobs requiring a strong bond and rapid cure. Quick Cure is highly water resistant but not waterproof. Quick Cure is quite thick, but is easily measured by squeezing equal sized lumps from the convenient application bottles.\u003c\/p\u003e","brand":"System Three Resins","offers":[{"title":"50ml Syringe","offer_id":40874322002084,"sku":"03025","price":21.85,"currency_code":"CAD","in_stock":false},{"title":"1\/2 Pint Kit","offer_id":40874322034852,"sku":"03026","price":32.9,"currency_code":"CAD","in_stock":true},{"title":"Pint Kit","offer_id":40874322067620,"sku":"03027","price":55.8,"currency_code":"CAD","in_stock":true},{"title":"Quart Kit","offer_id":40874322100388,"sku":"03028","price":103.2,"currency_code":"CAD","in_stock":true},{"title":"2 gallon Kit","offer_id":40874322133156,"sku":"03030","price":750.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/8528\/4772\/products\/Quick_Cure_5_1Pt.jpg?v=1630608995"},{"product_id":"quick-cure-15","title":"Quick Cure-15","description":"\n\u003cp\u003eQuick Cure-15 will give you some additional working time over the \u003ca href=\"https:\/\/fibertek.ca\/NewSite\/shop\/epoxy-resin\/quick-cure-5\/\"\u003e5-minute product\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eA two-component, solvent-free, epoxy\/polymercaptan adhesive system.\u003cbr\u003e\nMix at a convenient 1:1 ratio.\u003cbr\u003e\nIdeal for all small jobs requiring a strong bond and rapid cure.\u003cbr\u003e\nAn excellent gap filling adhesive.\u003cbr\u003e\nHighly water resistant but not waterproof.\u003cbr\u003e\nCures at lower temperatures.\u003c\/p\u003e","brand":"System Three Resins","offers":[{"title":"1\/2 Pint Kit","offer_id":40874323247268,"sku":"03122","price":32.9,"currency_code":"CAD","in_stock":true},{"title":"Pint Kit","offer_id":40874323280036,"sku":"03124","price":55.8,"currency_code":"CAD","in_stock":false},{"title":"Quart Kit","offer_id":40874323312804,"sku":"03128","price":103.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/8528\/4772\/products\/Quick_Cure_15_2Pt.jpg?v=1630609005"},{"product_id":"rotfix-1","title":"RotFix","description":"\n\u003cp\u003eRot Fix is an easy to use, low viscosity epoxy wood sealer, primer, and consolidant for repair and restoration of rotted, deteriorated, dried out or spongy wood. RotFix is a component of The EndRot System. It creates a sound, waterproof base for repair and restoration filler putty. A unique measuring\/application bottle is included with each 24 ounce RotFix kit. With this bottle you can accurately measure, mix and apply RotFix in batches from two ounces to 7 ounces.\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003e100% solids formulation is low odor and solvent free.\u003cbr\u003e\nFlows like water for superior penetration into wood and most porous materials.\u003cbr\u003e\nTwo part system features an easy 2:1 mixing ratio.\u003cbr\u003e\nApply by pouring or brush.\u003cbr\u003e\nReliably cures at temperatures as low as 35°F.\u003cbr\u003e\nCan be used on damp wood.\u003cbr\u003e\nUse to harden soft, \"punky”, wood as a base for further repair.\u003cbr\u003e\nSeals wood permanently to prevent future moisture penetration.\u003c\/p\u003e","brand":"System Three Resins","offers":[{"title":"Default Title","offer_id":40874323738788,"sku":"03180","price":68.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/8528\/4772\/products\/RotFix_1.5Pt.jpg?v=1630609010"},{"product_id":"sculpwood","title":"Sculpwood","description":"\n\u003cp\u003eSculpWood Putty is a two-component, solvent-free, kneadable epoxy. It is moldable, carvable, lightweight, strong, and exhibits excellent adhesion to a variety of substrates. It is easily sanded and will accept paint, screws and nails.\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eUse to replace rotted or chipped away wood; cracks and other cosmetic defects in window and door sills, frames, railings, furniture, etc.\u003cbr\u003e\nWill not shrink or become brittle after curing.\u003cbr\u003e\nFeatures a convenient 1:1 mixing ratio.\u003cbr\u003e\nResin and hardener are easily mixed by hand.\u003cbr\u003e\nCan be easily shaped and tooled: will not slump or sag. Once cured can be sanded, carved or machined.\u003cbr\u003e\nCan be primed and painted to match an existing finish.\u003cbr\u003e\nOnce cured will hold fasteners, nails, screws, etc.\u003cbr\u003e\nPart of the EndRot Wood Restoration System by System Three for permanent, non-structural repairs to rot and insect damaged architectural components.\u003c\/p\u003e\n\u003cp\u003eUse SculpWood Putty for replacing missing sections of windowsills, frames and furniture or for adding new sections to existing structures.\u003c\/p\u003e\n\u003cp\u003eSculpWood Putty \u0026amp; SculpWood Paste are the wood replacement components of The EndRot System. They are commonly used with System Three \u003ca href=\"https:\/\/www.systemthree.com\/products\/rotfix-epoxy-sealer\"\u003eRotFix\u003c\/a\u003e , a low viscosity wood sealer and consolidant.\u003c\/p\u003e","brand":"System Three Resins","offers":[{"title":"1 Quart Kit","offer_id":40874324099236,"sku":"03185","price":67.9,"currency_code":"CAD","in_stock":true},{"title":"2 Quart Kit","offer_id":40874324132004,"sku":"03186","price":113.4,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/8528\/4772\/products\/SculpWood_Putty_1Qt.jpg?v=1630609014"},{"product_id":"quikfair","title":"QuikFair","description":"\n\u003cp\u003eQuikFair is a lightweight, microballoon-filled, fast-curing two-part epoxy fairing putty with excellent moisture resistance. The two color-coded parts have a non-sagging, butter-like consistency and are easily mixed to form a third color.\u003c\/p\u003e\n\u003cp\u003eAt 77ºF QuikFair is sufficiently cured to be hand-sanded in 3 hours or machine sanded in 4 hours. This allows the user to apply three coats each 24 hours in a standard eight-hour shift or six in a round-the-clock basis.\u003c\/p\u003e","brand":"System Three Resins","offers":[{"title":"1.5 Pint Kit","offer_id":40874324295844,"sku":"03192","price":61.1,"currency_code":"CAD","in_stock":true},{"title":"1.5 Quart Kit","offer_id":40874324328612,"sku":"03193","price":95.15,"currency_code":"CAD","in_stock":true},{"title":"1.5 Gallon Kit","offer_id":40874324361380,"sku":"03194","price":320.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/8528\/4772\/products\/Quik_Fair_1.5_Pint.jpg?v=1630609021"},{"product_id":"west-system-105-epoxy-resin","title":"West System - 105 Epoxy Resin","description":"\u003cp\u003e\u003cstrong\u003eNOT AVAILABLE FOR FREE SHIPPING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRequires 205 Fast Hardener, 206 Slow Hardener or 207 Special Clear Hardener.\u003c\/p\u003e\n\u003cp\u003e105 Epoxy Resin is the base material on which all WEST SYSTEM 105 System epoxy compounds are built. The resin is a clear, pale yellow, low-viscosity liquid epoxy resin that cures to a hard, solid plastic with superior physical properties. Formulated for use with WEST SYSTEM hardeners, it can be cured in a wide temperature range to form a high-strength solid with excellent moisture resistance.\u003c\/p\u003e\n\u003cp\u003e105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cp) at 72 F (22C),\u003c\/p\u003e\n\u003cp\u003e105 Epoxy Resin is designed specifically to wet out and bond with wood fiber, fiberglass, reinforcing fabrics and a variety of metals when mixed at the proper ratio with a WEST SYSTEM Epoxy hardener. An excellent adhesive, 105 epoxy mixtures will bridge gaps and fill voids when modified with WEST SYSTEM fillers and can be sanded and shaped when cured. With roller applications, it has excellent thin-film characteristics to flow out and self-level without “fisheyeing.” 105 Epoxy Resin\/207 Special Clear Hardener mixtures cure clear so you can achieve a natural finish when coating with varnish.\u003c\/p\u003e\n\u003cp\u003ePair 105 Epoxy with corresponding letter size of 205 Fast Hardener, 206 Slow Hardener, 209 Extra Slow Hardener or 207 Special Clear Hardener.\u003c\/p\u003e","brand":"West System","offers":[{"title":"105A (946ml)","offer_id":40874374856868,"sku":"03501","price":81.4,"currency_code":"CAD","in_stock":true},{"title":"105B (3.7 Ltr)","offer_id":40874374889636,"sku":"03507","price":183.3,"currency_code":"CAD","in_stock":true},{"title":"105C (4.35 Gallon)","offer_id":57606959399076,"sku":"03513","price":579.55,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/8528\/4772\/products\/west-system-105B-resin.jpg?v=1630609437"},{"product_id":"west-system-205-fast-hardener","title":"West System - 205 Fast Hardener","description":"\u003cp\u003e\u003cstrong\u003eNOT AVAILABLE FOR FREE SHIPPING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUsed with \u003ca href=\"https:\/\/fibertek.ca\/shop\/fiberglass-materials\/105-epoxy-resin\/\"\u003e105 Resin\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e205 Fast Hardener is a medium-viscosity epoxy curing agent. It is used in a majority of bonding situations, at lower temperatures, and to produce a rapid cure that develops its physical properties quickly at room temperature. When mixed with WEST SYSTEM \u003ca href=\"https:\/\/fibertek.ca\/shop\/fiberglass-materials\/105-epoxy-resin\/\"\u003e105 Resin\u003c\/a\u003e in a five-part resin to one-part hardener ratio, the cured resin\/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties. 205 Fast Hardener is not intended for clear coating.\u003cbr\u003e\u003cstrong\u003e\u003cbr\u003ePot Life at 72F (22C):\u003c\/strong\u003e 9 to 12 minutes\u003cbr\u003e\u003cstrong\u003eCure to a solid state:\u003c\/strong\u003e 6 to 8 hours\u003cbr\u003e\u003cstrong\u003eCure to maximum strength:\u003c\/strong\u003e 1 to 4 days\u003cbr\u003e\u003cstrong\u003eMinimum recommended temperature:\u003c\/strong\u003e 40°F (4°C)\u003c\/p\u003e","brand":"West System","offers":[{"title":"205A (207ml)","offer_id":40874375119012,"sku":"03502","price":53.7,"currency_code":"CAD","in_stock":true},{"title":"205B (814ml)","offer_id":40874375151780,"sku":"03508","price":116.35,"currency_code":"CAD","in_stock":true},{"title":"205C (3.6 Liters)","offer_id":57606960119972,"sku":"03514","price":313.9,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/8528\/4772\/products\/west-system-205B-hardener.jpg?v=1630609443"},{"product_id":"west-system-206-slow-hardener","title":"West System - 206 Slow Hardener","description":"\u003cp\u003e\u003cstrong\u003eNOT AVAILABLE FOR FREE SHIPPING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse with \u003ca href=\"https:\/\/fibertek.ca\/shop\/fiberglass-materials\/105-epoxy-resin\/\"\u003e105 Resin\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working time or a longer cure time is needed. It also provides adequate working time at higher shop temperatures. When combined with \u003ca href=\"https:\/\/www.westsystem.com\/105-epoxy-resin\/\"\u003e105 Resin\u003c\/a\u003e in a five-part epoxy resin to one-part hardener ratio, the cured resin\/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and barrier coating properties. 206 Slow Hardener is not intended for clear coating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePot life at 72°F (22°C): 20 to 25 minutes\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eCure to a solid state: 10 to 15 hours\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eCure to maximum strength: 1 to 4 days\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eMinimum recommended temperature: 60°F (16°C)\u003c\/strong\u003e\u003c\/p\u003e","brand":"West System","offers":[{"title":"206A (207ml)","offer_id":40874376233124,"sku":"03503","price":47.0,"currency_code":"CAD","in_stock":true},{"title":"206B (814ml)","offer_id":40874376265892,"sku":"03509","price":106.65,"currency_code":"CAD","in_stock":true},{"title":"206C 93.6 Liters)","offer_id":57606960349348,"sku":"03515","price":272.1,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/8528\/4772\/products\/west-system-206B-hardener.jpg?v=1630609449"},{"product_id":"west-system-207-special-clear-hardener","title":"West System - 207 Special Clear Hardener","description":"\u003cp\u003eUse with \u003ca href=\"https:\/\/fibertek.ca\/shop\/fiberglass-materials\/105-epoxy-resin\/\"\u003e105 Resin\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eBlush-free 207 Special Clear Hardener was developed for coating and fiberglass cloth application where an exceptionally clear, moisture-resistant, natural wood finish is desired. Blended with 105 Epoxy Resin, 207 Hardener will not blush or turn cloudy in humid conditions. Thin film applications roll out and tip off smoothly, requiring less sanding in preparation for finish coatings.\u003c\/p\u003e\n\u003cp\u003eProfessional and first-time builders like 207 Special Clear Hardener because it is reliable, easy to use, as does not blush. Three coats or more can be applied in one day without additional surface preparation. Fewer coats are required to fill fiberglass weave and in most cases, the final coating can be sanded the following day. Boats can be built faster. Builders also appreciate the excellent fiberglass wet-out characteristics achieved with 105 Resin\/207 Special Clear Hardener, yet it won’t drain from vertical surfaces like the very slow curing, low-viscosity epoxies.\u003c\/p\u003e\n\u003cp\u003e105\/207 Epoxy has strong physical properties, so it can be used as a structural adhesive for gluing and laminating. It has excellent compatibility with paints and varnishes. An ultraviolet inhibitor in 207 Special Clear Hardener helps provide a beautiful, long-lasting finish when used with quality UV filtering varnish. 105\/207 cures clear and colorless.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMix Ratio: \u003c\/strong\u003e3 parts resin : 1 part hardener\u003cbr\u003e\n\u003cstrong\u003ePot life at 72°F (22°C):\u003c\/strong\u003e 20 to 26 minutes\u003cbr\u003e\n\u003cstrong\u003eCure to a solid state:\u003c\/strong\u003e 10 to 15 hours\u003cbr\u003e\n\u003cstrong\u003eCure to maximum strength:\u003c\/strong\u003e 4 to 7 days\u003cbr\u003e\n\u003cstrong\u003eMinimum recommended temperature:\u003c\/strong\u003e 60°F (16°C)\u003c\/p\u003e","brand":"West System","offers":[{"title":"207SA (315ml)","offer_id":40874376429732,"sku":"03504","price":85.79,"currency_code":"CAD","in_stock":true},{"title":"207SB (1.25 Ltr)","offer_id":40874376462500,"sku":"03510","price":172.2,"currency_code":"CAD","in_stock":false},{"title":"207SC (1.45 Gallon)","offer_id":57607002390692,"sku":"03516","price":434.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/8528\/4772\/products\/west-system-207SB-hardener.jpg?v=1630609454"},{"product_id":"west-system-roller-covers-2-pkg","title":"West System Roller Covers 2\/pkg.","description":"\n\u003cp\u003eThese thin polyurethane foam covers are the only roller covers recommended for epoxy application. The thin foam allows you to control film thickness, avoid drips and runs, and get a smoother coating. The 7″ covers can be cut for smaller jobs, narrow strips and tight areas. Cut segments to make an ideal tipping brush.\u003c\/p\u003e","brand":"West System","offers":[{"title":"Default Title","offer_id":40874403463332,"sku":"03506","price":12.85,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/8528\/4772\/products\/800-2-roller-covers.jpg?v=1630609737"},{"product_id":"west-system-403-microfibers","title":"West System - 403 Microfibers","description":"\n\u003cp\u003e403 Microfibers, a fine fiber blend, is used as a thickening additive with resin\/hardener to create a multi-purpose adhesive, especially for bonding wood. Epoxy thickened with microfibers has good gap-filling qualities while retaining excellent wetting\/penetrating capability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e off-white.\u003c\/p\u003e","brand":"West System","offers":[{"title":"Default Title","offer_id":40874403561636,"sku":"03520","price":38.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/8528\/4772\/products\/west-system-403-microfibers.jpg?v=1630609740"},{"product_id":"west-system-404-high-density","title":"West System - 404 High Density","description":"\n\u003cp\u003e404 High-Density Adhesive Filler is an epoxy thickening additive developed for maximum physical adhesive properties in hardware bonding where high-cyclic loads are anticipated. It can also be used for filleting and gap filling with epoxy where maximum strength is necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e off-white.\u003c\/p\u003e","brand":"West System","offers":[{"title":"Default Title","offer_id":40874403594404,"sku":"03521","price":43.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/8528\/4772\/products\/west-system-404-high-density-1.jpg?v=1630609743"},{"product_id":"west-system-405-filleting-blend","title":"West System - 405 Filleting Blend","description":"\n\u003cp\u003e405 Filleting Blend Adhesive Filler is a strong, wood-toned epoxy filler for use in epoxy joints and epoxy fillets on naturally finished wood. It mixes easily with epoxy and lets you create fillets that are smooth and require little sanding. Its color is a consistent brown, so 405 Filleting Blend can be blended with other WEST SYSTEM Fillers to modify the shade of thickened epoxy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e brown.\u003c\/p\u003e","brand":"West System","offers":[{"title":"Default Title","offer_id":40874403692708,"sku":"03522","price":39.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/8528\/4772\/products\/west-system-405-filleting-blend.jpg?v=1630609748"},{"product_id":"west-system-406-colloidal-silica","title":"West System - 406 Colloidal Silica","description":"\n\u003cp\u003e406 Colloidal Silica is an epoxy thickening additive used to control the viscosity of the epoxy and prevent epoxy runoff in vertical and overhead joints. This is a very strong filler that creates a smooth mixture, ideal for general epoxy bonding and filleting. It is also our most versatile epoxy filler. Often used in combination with other fillers, 406 can be used to improve strength, abrasion resistance, and consistency of epoxy fairing compounds, resulting in a tougher, smoother surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e off-white.\u003c\/p\u003e","brand":"West System","offers":[{"title":"Default Title","offer_id":40874403725476,"sku":"03523","price":32.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/8528\/4772\/products\/west-system-406-colloidal-silica.jpg?v=1630609751"},{"product_id":"west-system-407-low-density","title":"West System - 407 Low Density","description":"\n\u003cp\u003e407 Low-Density filler is a blended microballoon-based filler added to epoxy resin\/hardener to make fairing putties that are easy to sand or carve. This epoxy filler is reasonably strong on a strength-to-weight basis. Cures with epoxy to a dark red\/brown color.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e dark red-brown.\u003c\/p\u003e","brand":"West System","offers":[{"title":"Default Title","offer_id":40874403954852,"sku":"03524","price":53.9,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/8528\/4772\/products\/west-system-407-low-density.jpg?v=1630609755"},{"product_id":"west-system-410-microlight","title":"West System - 410 Microlight","description":"\n\u003cp\u003e410 Microlight™ is the ideal low-density filler for creating a light, easily-worked epoxy fairing compound especially suited for fairing large areas. Microlight mixes with epoxy with greater ease than 407 Low-Density filler or microballoons and is approximately 30% easier to sand after the epoxy\/410 mixture cures. Epoxy thickened with Microlight feathers to a fine edge and is also more economical for large fairing jobs. Not recommended under dark paint or other surfaces subject to high temperatures.\u003c\/p\u003e\n\u003cp\u003eColor: tan.\u003c\/p\u003e","brand":"West System","offers":[{"title":"Default Title","offer_id":40874403987620,"sku":"03525","price":44.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/8528\/4772\/products\/west-system-410-microlight.jpg?v=1630609758"},{"product_id":"west-system-422-barrier-coat-additive","title":"West System - 422 Barrier Coat Additive","description":"\n\u003cp\u003eA proprietary blend designed to improve cured epoxy’s moisture exclusion effectiveness. 422 is used as a barrier coating additive to help prevent gelcoat blistering in polyester fiberglass boat bulls. 422 also increases the epoxy’s abrasion resistance. Cures to a light gray color.\u003c\/p\u003e\n\u003cp\u003eAdd to mixed resin\/hardener at the rate of 15 to 20% by volume or 3 tablespoons per 8 fl oz of epoxy. 16 oz can of 422 will modify approximately half a gallon of mixed epoxy.\u003c\/p\u003e","brand":"West System","offers":[{"title":"Default Title","offer_id":40874404020388,"sku":"03526","price":61.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/8528\/4772\/products\/west-system-422-barrier-coat-additive.jpg?v=1630609761"},{"product_id":"west-system-423-graphite-powder","title":"West System - 423 Graphite Powder","description":"\n\u003cp\u003e423 Graphite Powder is a fine black powder that can be mixed with epoxy to produce a low-friction exterior coating with increased scuff resistance and durability. Epoxy\/graphite is commonly used as a low-load, low-speed bearing surface, as a coating on rudders and centerboards, or on the bottoms of racing craft that are dry sailed. It does not provide antifouling qualities. The epoxy\/graphite mixture cures to a black color.\u003c\/p\u003e\n\u003cp\u003eAdd to mixed resin\/hardener at the rate of 10% by volume or 1.5 tablespoons per 8 fl oz. of epoxy. 12 oz can of 423 will modify approximately one gallon of epoxy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e12 oz\u003c\/strong\u003e\u003c\/p\u003e","brand":"West System","offers":[{"title":"Default Title","offer_id":40874404053156,"sku":"03527","price":54.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/8528\/4772\/products\/west-system-423-graphite-powder.jpg?v=1630609764"},{"product_id":"west-system-six10-thickened-epoxy-adhesive","title":"West System - Six10 Thickened Epoxy Adhesive","description":"\u003cp\u003eSix10® Thickened Epoxy Adhesive combines the strength and reliability and excellent physical properties of a two-part WEST SYSTEM Epoxy with point-and-shoot convenience. The self-metering coaxial cartridge dispenses a gap-filling structural epoxy that bonds tenaciously to wood, metals, fiberglass and concrete. The tube comes with a static mixer that lets you lay down a bead of thickened epoxy with any standard caulking gun.\u003c\/p\u003e\n\u003cp\u003eSix10’s shear thinning properties make it “thinner” as it’s worked. It can be easily tooled into a non-sagging fillet or used to wet out light to moderate reinforcing fabrics like fiberglass. The hardener provides a long open time but has fast thru-cure. Six10 stays workable in the static mixer for 42 minutes, making it practical for long or complicated assemblies.\u003c\/p\u003e\n\u003cp\u003eEach tube of Six 10 comes equipped with a static mixing wand. Additional static mixing wands are available in sets of two (product number 600-2) or twelve (product number 600-12).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e190 ml\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional \u003ca href=\"https:\/\/fibertek.ca\/shop\/fiberglass-materials\/epoxy-resins\/west-system-static-mixer-for-six10-epoxy-2-pkg\/\"\u003eStatic Mixers\u003c\/a\u003e available in packs of 2.\u003c\/strong\u003e\u003c\/p\u003e","brand":"West System","offers":[{"title":"Default Title","offer_id":40874404118692,"sku":"03530","price":50.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/8528\/4772\/products\/west-system-six10.jpg?v=1630609767"},{"product_id":"west-system-static-mixer-for-six10-epoxy-2-pkg","title":"West System - Static Mixer for Six10 Epoxy 2\/pkg","description":"\u003cp\u003eThis Static Mixer is used for the Six 10 Thickened Epoxy.\u003c\/p\u003e","brand":"West System","offers":[{"title":"Default Title","offer_id":40874404249764,"sku":"03531","price":9.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/8528\/4772\/products\/six10-static-mixer.jpg?v=1630609771"},{"product_id":"west-system-g-flex-650-toughened-epoxy","title":"West System - G\/Flex 650 Toughened Epoxy","description":"\n\u003cp\u003eA toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. This gives G\/flex 650 the ability to make structural bonds that can absorb the stress of expansion, contraction, shock, and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM fillers and additives, and used to wet-out fiberglass tapes and fabrics. Mixed at a 1:1 ratio, G\/flex 650 gives you 45 minutes of working time at 72°F. It reaches an initial cure in 7 to 10 hrs and full cure in 24 hrs.\u003c\/p\u003e","brand":"West System","offers":[{"title":"Default Title","offer_id":40874405167268,"sku":"03532","price":52.3,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/8528\/4772\/products\/gflex-650.jpg?v=1630609774"},{"product_id":"west-system-g-flex-655-thickened-epoxy-adhesive","title":"West System - G\/Flex 655 Thickened Epoxy Adhesive","description":"\n\u003cp\u003eA toughened, versatile epoxy that is conveniently pre-thickened for permanent waterproof bonding of plastic, fiberglass, ceramics, metals, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. This gives G\/flex 655 the ability to make structural bonds that can absorb the stress of expansion, contraction, shock, and vibration. It is ideal for bonding dissimilar materials. Mixed at a 1:1 ratio, G\/flex 655 gives you 45 minutes of working time at  72°F. It reaches an initial cure in 7 to 10 hours and full cure in 24 hours.\u003c\/p\u003e","brand":"West System","offers":[{"title":"Default Title","offer_id":40874405331108,"sku":"03534","price":68.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/8528\/4772\/products\/gflex-655.jpg?v=1630609777"},{"product_id":"west-system-fillable-caulking-tubes-2-pkg","title":"West System - Fillable Caulking Tubes 2\/pkg","description":"\n\u003cp\u003eFor use with a standard caulking gun. Great for injecting large amounts of epoxy, laying a lengthy bead of epoxy or making fillets. Can be refilled several times before epoxy begins to cure. Tubes can be refilled again after cured epoxy is popped out. Holds approximately 10 fl oz.\u003c\/p\u003e","brand":"West System","offers":[{"title":"Default Title","offer_id":40874405396644,"sku":"40345","price":15.1,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/8528\/4772\/products\/fillable-caulking-tube.jpg?v=1630609781"},{"product_id":"aqua-set-epoxy-resin-kit","title":"Aqua-Set Epoxy Resin Kit","description":"\n\u003cp\u003eAqua Set is a specially formulated multi-purpose epoxy system, totally insensitive to moisture, that will bond and cure even underwater and at temperatures too low for normal epoxies. Aqua Set is formulated with maximum penetrating properties for use as a sealer and laminating resin with glass cloth or synthetic woven fabrics. Aqua Set is also an excellent glue for a multitude of substrates and can be thickened with a variety of fillers for gluing irregular surfaces or for use as a putty or fairing compound. Bulk Pricing available on request.\u003c\/p\u003e","brand":"Fiber Craft","offers":[{"title":"375ml Kit","offer_id":40874436329636,"sku":"70301","price":33.4,"currency_code":"CAD","in_stock":true},{"title":"750ml Kit","offer_id":40874436362404,"sku":"70302","price":58.8,"currency_code":"CAD","in_stock":true},{"title":"1.5 Liter Kit","offer_id":40874436395172,"sku":"70303","price":104.6,"currency_code":"CAD","in_stock":true},{"title":"3 Liter Kit","offer_id":40874436427940,"sku":"70304","price":185.6,"currency_code":"CAD","in_stock":true},{"title":"6 Liter Kit","offer_id":40874436460708,"sku":"70305","price":291.4,"currency_code":"CAD","in_stock":true},{"title":"12 Liter Kit","offer_id":40874436493476,"sku":"70306","price":548.3,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/8528\/4772\/products\/aquaset-epoxy-resin.jpg?v=1630610049"},{"product_id":"crystal-sheen","title":"Crystal Sheen","description":"\n\u003cp\u003eCrystal Sheen is a two-component, smooth flowing, easily mixed epoxy polymer finish. For use on photographs, plaques, prints, signs, table and bar tops, burls, plaster and paper mache items. One coat of Crystal Sheen is equal to approximately 50 coats of urethane varnish. Complete instructions with each kit.\u003c\/p\u003e","brand":"Coast Fiber Tek","offers":[{"title":"250ml Kit","offer_id":40874437607588,"sku":"70402","price":15.85,"currency_code":"CAD","in_stock":true},{"title":"500ml Kit","offer_id":40874437640356,"sku":"70403","price":24.15,"currency_code":"CAD","in_stock":true},{"title":"1 Liter Kit","offer_id":40874437673124,"sku":"70404","price":38.45,"currency_code":"CAD","in_stock":true},{"title":"4 Liter Kit","offer_id":40874437705892,"sku":"70406","price":144.85,"currency_code":"CAD","in_stock":true},{"title":"8 Liter Lit","offer_id":40874437738660,"sku":"70408","price":234.65,"currency_code":"CAD","in_stock":true},{"title":"10 Gal. Kit","offer_id":40874437771428,"sku":"70409","price":1070.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/8528\/4772\/products\/crystal-sheen.jpg?v=1630610060"},{"product_id":"system-three-epoxy-pigment","title":"System Three Epoxy Pigment","description":"\n\u003cp\u003eClear epoxy adhesives and coatings can be colored easily. These are concentrated pigments, dispersed in epoxy resins, which can be added in any quantity.\u003c\/p\u003e\n\u003cp\u003eAdd the dispersion to the epoxy resin (Part A), then measure that mixture in the proper proportion with the hardener (Part B). If added according to these suggestions, the colored pigments will not detract from any of the properties of clear epoxy.\u003c\/p\u003e","brand":"System Three Resins","offers":[{"title":"Black 2 oz.","offer_id":40874861068452,"sku":"01624","price":21.7,"currency_code":"CAD","in_stock":false},{"title":"Blue 2 oz.","offer_id":40874861101220,"sku":"01626","price":21.7,"currency_code":"CAD","in_stock":true},{"title":"Brown 2 oz.","offer_id":40874861133988,"sku":"01623","price":21.7,"currency_code":"CAD","in_stock":true},{"title":"Red 2 oz.","offer_id":40874861199524,"sku":"01622","price":21.7,"currency_code":"CAD","in_stock":true},{"title":"White 2 oz.","offer_id":40874861232292,"sku":"01620","price":21.7,"currency_code":"CAD","in_stock":false},{"title":"Yellow 2 oz.","offer_id":40874861265060,"sku":"01621","price":21.7,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/8528\/4772\/products\/system-three-white-epoxy-pigment.jpg?v=1630613277"},{"product_id":"deep-cast-epoxy","title":"Deep Cast Epoxy","description":"\u003cp data-mce-fragment=\"1\"\u003eDeep Cast is an unaccelerated clear epoxy casting resin system, which offers a long open time for bubble removal and precise article placement. It also avoids high exothermic reaction and the resulting shrinkage after curing.\u003cspan style=\"color: inherit; font-family: inherit; font-size: 15px;\" data-mce-fragment=\"1\" data-mce-style=\"color: inherit; font-family: inherit; font-size: 15px;\"\u003e Deep Cast Clear Casting Resin has been especially formulated for deep casting in one pour making it ideal for resin river tables, also known as resin live edge tables\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePerfect for resin river tables\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eInbuilt UV inhibitors\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWater clear casting resin\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMix and pour up to 12 litres or up to 50mm deep in one pour\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDecorative castings\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaking paperweights\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eExcellent visual properties\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"eliChem","offers":[{"title":"1.5 Litre Kit","offer_id":41940137509028,"sku":"03300","price":93.2,"currency_code":"CAD","in_stock":true},{"title":"6 Litre Kit","offer_id":41940137541796,"sku":"03301","price":338.4,"currency_code":"CAD","in_stock":false},{"title":"30 Litre Kit","offer_id":57606958121124,"sku":"03302","price":1190.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/8528\/4772\/products\/DeepCastEpoxy.jpg?v=1647467187"},{"product_id":"silvertip-epoxy-resin-kit","title":"Silvertip Epoxy Resin Kit","description":"\u003cp data-mce-fragment=\"1\"\u003eSilverTip Epoxy is a medium-low viscosity, liquid epoxy resin system that has been optimized for coating and reinforcing fabric saturation in wood-composite boat building. It will outperform any other product in these applications. SilverTip Epoxy is designed for use with fiberglass, Kevlar®, Dynel® and graphite as well as on bare wood. It has superior wet-out characteristics with little tendency to foam or trap air.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBoth the resin and hardener are nearly colorless and are used in an easy 2:1 volumetric ratio. SilverTip Epoxy cures to a brilliant blush-free film with either the fast or slow hardener eliminating secondary bonding concerns as experienced with other epoxies. The working time is longer than most boat building epoxies without extending cure time. The cured film is tough and resilient with better heat resistance than other epoxies cured at room temperature. Fillers, wood flour, and bulking agents can be combined with SilverTip Epoxy.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eExceptionally fast wet-out of fiberglass and other reinforcing media.\u003cbr data-mce-fragment=\"1\"\u003eSuperior defoaming properties and little tendency to float fabric.\u003cbr data-mce-fragment=\"1\"\u003eResistance to print-through.\u003cbr data-mce-fragment=\"1\"\u003eHas excellent hot weather performance following a mild post-cure compared to most room\u003cbr data-mce-fragment=\"1\"\u003etemperature cure resin systems.\u003cbr data-mce-fragment=\"1\"\u003eCures without forming an amine blush with either the fast or slow hardener.\u003cbr data-mce-fragment=\"1\"\u003eCures quickly to a sandable state (no sanding required between coats when recoating within 72 hours).\u003cbr data-mce-fragment=\"1\"\u003eSandable same day with fast hardener.\u003cbr data-mce-fragment=\"1\"\u003eFeatures a convenient 2:1 mixing ratio.\u003cbr data-mce-fragment=\"1\"\u003eUse either a slow or fast hardener or blend the two hardeners for even more flexibility in working time.\u003cbr data-mce-fragment=\"1\"\u003eCures exceptionally clear for bright finished applications.\u003cbr data-mce-fragment=\"1\"\u003eCompatible with all 2-part and most 1-part marine primers.\u003cbr data-mce-fragment=\"1\"\u003eSilverTip Slow Hardener can be post-cured for even greater high temperature resistance and elevated mechanical specifications.\u003c\/p\u003e","brand":"System Three Resins","offers":[{"title":"1.5 Qt. Kit w\/Fast Hardener","offer_id":42999768744100,"sku":"03240","price":121.6,"currency_code":"CAD","in_stock":true},{"title":"1.5 Qt. Kit w\/Slow Hardener","offer_id":42999768842404,"sku":"03241","price":121.6,"currency_code":"CAD","in_stock":true},{"title":"1.5 Gallon Kit w\/Fast Hardener","offer_id":42999768776868,"sku":"03242","price":318.7,"currency_code":"CAD","in_stock":false},{"title":"1.5 Gallon Kit w\/Slow Hardener","offer_id":42999768875172,"sku":"03243","price":318.7,"currency_code":"CAD","in_stock":true},{"title":"7.5 Gallon Kit w\/Fast Hardener","offer_id":42999768809636,"sku":"03244","price":1210.3,"currency_code":"CAD","in_stock":false},{"title":"7.5 Gallon Kit w\/Slow Hardener","offer_id":42999768907940,"sku":"03245","price":1210.3,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/8528\/4772\/products\/silvertip-fast-1qt-kit.jpg?v=1670110020"}],"url":"https:\/\/fibertek.ca\/collections\/epoxy-resins\/epoxy:pigment.oembed","provider":"Coast Fiber Tek ","version":"1.0","type":"link"}