Universal® Mold Release Agent is formulated especially for mold making and casting, and works well
with most liquid rubber and liquid plastic products. It will release mold rubbers (such as polyurethanes
and polysulfides) from properly prepared models. Sealing porous models (wood, plaster, concrete) or
certain modeling clays (containing water or sulfur) with Smooth-On SuperSeal® or other sealer may be
necessary. If using silicone rubber, seal model surface with SuperSeal® only. Do not use UMR.
|
UNIVERSAL
MOLD RELEASE AEROSOL |
Part no. |
Size |
Cost |
25650 |
12 oz. |
17.60 |
UNIVERSAL
MOLD RELEASE LIQUID |
Part no. |
Size |
Cost |
25651 |
1 gal. |
76.45 |
|
Ease Release 2300 is designed to release molded parts from deep draw molds. It is ideal for production casting of polyurethane elastomers, epoxy resins and high temperature melt waxes from a variety of surfaces. Ease Release 2300 is effective on all mold surfaces such as steel, aluminum, epoxy, urethane and RTV silicone rubber mold materials.
|
Part no. |
Size |
Cost |
25653 |
12 oz. |
17.60 |
|
Mann Ease Release 200 is an excellent general purpose release agent for making molds and casting parts. This product will release polyurethane elastomers, polyurethane foam, epoxy resin, polyester resins, platinum silicones, rubber and thermoplastic polymers. Ease Release 200 is effective on aluminum, chrome, platinum silicone, epoxy, rubber and steel molds.
 |
EASE RELEASE 200
AEROSOL |
Part no. |
Size |
Cost |
25652 |
12 oz. can |
18.20 |
EASE RELEASE 205
LIQUID |
Part no. |
Size |
Cost |
25665 |
1 pint |
22.30 |
25658 |
1 gal. |
83.60 |
|
Mann Ease Release 500 is dry film mold release agent and dry lubricant. Ease Release 500 is a Teflon-like release and is effective in releasing most casting and molding systems such as plastics, rubber, composites and similar materials. It gives a high gloss finish to most cast parts.
|
Part no. |
Size |
Cost |
25657 |
12 oz. can |
23.35 |
|
|
EASE RELEASE 305 |
Part no. |
Size |
Cost |
25654 |
1 gal. |
76.45 |
25655 |
5 gal. |
233.75 |
|
One Step® is a convenient, economical liquid sealing agent and release agent in one. This non-flammable,
non-VOC formula is offered as a “one step” alternative to using a sealing agent followed by a release agent during the
mold making process using Smooth-On urethane mold rubbers. One Step® will facilitate the release of cured urethane
mold rubber from plaster, concrete, stone, brick, marble, limestone, wood, metal and other surfaces. Do not use on
modeling clays.
|
Part no. |
Size |
Cost |
25668 |
1 Gal |
81.50 |
|
EASE RELEASE 2831 is a wax-based non-silicone release agent. It has proven to be effective when
used to release polyurethane foams elastomers. EASE RELEASE 2831 works with aluminum, steel,
and elastomeric mold construction.
|
EASE RELEASE 2831 |
Part no. |
Size |
Cost |
25662 |
1 pint |
28.75 |
25663 |
1 gal. |
65.50 |
25664 |
5 gal. |
218.40 |
|
SuperSeal® was developed as an economical, fast-drying sealing agent for a variety
of porous surfaces including gypsum plasters, concrete and wood. This sealing agent
will quickly and effectively seal surfaces without interfering with surface detail. The
new formula offers better performance and faster evaporation. Mold rubber
(polyurethane, silicone or polysulfide) can then be applied.
|
SUPER SEAL |
Part no. |
Size |
Cost |
25670 |
1 pint. |
28.15 |
25671 |
1 gal. |
60.65 |
|
Sonite™ Wax is a soft paste wax used to seal porous surfaces and will aid in releasing urethane mold rubber
from a variety of model surfaces, plastics from plastics and can be used for other industrial applications. (It
may be necessary to follow application of Sonite™ Wax with suitable mold release agent such as Universal
Mold Release™).
|
SONITE WAX |
Part no. |
Size |
Cost |
25673 |
1 qt. |
26.55 |
|
IN & OUT® II water soluble release agent will aid in releasing concrete or gypsum plaster
castings from Smooth-On rubber molds.
IN & OUT ® II provides a clean, positive release and does not interfere with or affect
surface detail and helps minimize air bubbles in finished castings.
|
IN & OUT II |
Part no. |
Size |
Cost |
25676 |
1 gal. |
72.90 |
25677 |
5 gal. |
306.80 |
|
AquaCon® is a water based concrete release agent that aids in releasing concrete castings from Smooth-On rubber
molds and other surfaces such as melamine, metal and non-porous (sealed) wood. It provides a clean, positive release,
does not interfere with color or surface detail and helps minimize bug holes and air bubbles in finished castings.
|
AQUACON |
Part no. |
Size |
Cost |
25669 |
1 gal. |
39.65 |
|
|
U-10 SOAP SOLUTION |
Part no. |
Size |
Cost |
25681 |
1 gal. |
67.40 |
25682 |
5 gal. |
229.00 |
|
|
|
|