Facebook

 


 
Smooth-On Products

** Bulk pricing available upon request.
** Prices are subject to change without notice. All prices are in Canadian funds.
** Applicable taxes are extra .

PLATINUM CURE SILICONE RUBBER  
PRODUCT DESCRIPTION COST

Soma Foama®
Flexible Platinum Silicone Foam

Soma Foama® 15 is a soft, two-component platinum silicone flexible foam that is versatile and easy to use. Mixed 2 Parts A: 1Part B by volume, foam can be poured into a mold or over other surfaces. Pot life (working time) is 50 seconds at room temperature (73°F / 23°C) and handling time is 20 minutes at room temperature and full cure is 1 hour. Foam expands 4 times its original volume and develops a uniform 15 lb./cu. ft. cell structure
(240 kg/m³). Vibrant colors can be achieved by adding Silc-Pig® silicone color pigments.

MSDS Sheet
Technical Information
SOMA FOAMA 15
Part no. Size Cost
25150 3 x 1 pint 87.50
25151 3 x 1 gal 514.00
SOMA FOAMA 25
Part no. Size Cost
25153 2 x 1 pint 57.25

Smooth-Sil® Series
Addition Cure Silicone Rubber Compounds

Smooth-On Smooth-Sil® Platinum Silicones cure at room temperature with negligible shrinkage. With different hardnesses to
choose from, Smooth-Sil® products offer tremendous versatility and are suitable for making production molds of any configuration,
large or small. These silicones exhibit good chemical, abrasion and heat resistance. Materials such as plasters, concrete, wax, low-melt metal alloys or resins (urethane, epoxy or polyester) can then be cast into these silicone rubbers without a release agent.
Smooth-Sil® Platinum Silicones are used for rapid prototyping, wax casting (foundries and candle makers), architectural restoration and for casting concrete. Smooth-Sil® 940 is suitable for food related applications. (See separate technical bulletin for usage instructions available at www.smooth-on.com).

MSDS Sheet
Technical Information
Smooth Sil 935,940  
Smooth Sil 950  
SMOOTH SIL 935
Part no. Size Cost
25158 1 qt. kit 62.30
25159 1 gal. kit 227.60
25160 5 gal. kit 917.50
SMOOTH SIL 940
Part no. Size Cost
25161 1 qt. kit 62.30
25162 1 gal. kit 227.60
25163 5 gal. kit 917.50
SMOOTH SIL 950
Part no. Size Cost
25164 1 qt. kit 62.30
25165 1 gal. kit 227.60
25166 5 gal. kit 917.50

SORTA-Clear® Series
Addition Cure Silicone Rubber Compounds

SORTA-Clear® Series rubbers are premium water white translucent silicone rubbers (platinum catalyst) which cure at room
temperature with negligible shrinkage. Available in Shore 18A, 37A and 40A hardness, these rubbers feature high tensile and tear strength. Sorta Clear 37 offers the convenience of a 1A:1B by volume mix ratio. The 18A and 40A products require a gram scale for measuring parts A + B.
SORTA-Clear® silicones are ideal for making prototype, jewelry or other molds of any configuration where model visibility is
important (i.e. extracting a model from the mold via cutting). Materials such as urethane, epoxy or polyester resins can then be
cast into SORTA-Clear® silicone without application of a release agent. Other materials such as wax and low melt metal alloys can
also be cast into SORTA-Clear®. SORTA-Clear® can be pigmented with SILC Pig® silicone pigments.
SORTA Clear® silicone rubbers are FOOD SAFE and can be used for culinary applications including casting chocolate and other confections. (See separate technical bulletin for usage instructions available at www.smooth-on.com).

MSDS Sheet
Technical Information
Sorta Clear 18  
Sorta Clear 37  
Sorta Clear 40  

SORTA CLEAR 18
10 : 1

Part no. Size Cost
25167 1 qt. kit 59.60
25168 1 gal. kit 212.70

SORTA CLEAR 37
1 : 1

Part no. Size Cost
25286 2 x 1 pint kit 57.30
25287 2 x 1 gal. kit 361.85

SORTA CLEAR 40
10 : 1

Part no. Size Cost
25169 1 qt. kit 59.60
25170 1 gal. kit 212.70

Dragon Skin® FX-Pro
Translucent Silicone Mold Rubber

Dragon Skin® FX-Pro is a soft, stable, high performance platinum silicone rubber specifically designed for creating silicone makeup appliances and skin effects. Dragon Skin® FX-Pro is compatible with Skin-Tite® silicone adhesive as well as medical grade pressure sensitive adhesives for adhering silicone appliances temporarily to the skin. Soft and stretchy FX-Pro has a Shore hardness of 2A. FX-Pro can be combined with SLACKER® deadening agent to create a very soft silicone gel for filling encapsulated silicone pieces. An infinite number of color effects can be achieved by adding Silc-Pig® silicone pigments. Cured rubber can also be painted with the Psycho Paint® system.

MSDS Sheet
Technical Information
DRAGON SKIN FX PRO
Part no. Size Cost
25183 2 x 1 pint 47.10
25184 2 x 1 gal 304.60
25185 2 x 5 gal 1290.10

Dragon Skin® Series
Addition Cure Silicone Rubber Compounds

Dragon Skin® silicones are high performance platinum cure liquid silicone compounds that are used for a variety of applications
ranging from creating skin effects and other movie special effects to making production molds for casting a variety of materials.
Because of the superior physical properties and flexibility of Dragon Skin® rubbers, they are also used for medical prosthetics and cushioning applications. Great for Making Molds for a Variety of Applications - Available in Shore 10A and 0A, Dragon Skin® silicones can be used to make exceptionally strong and tear resistant molds for casting plaster, wax, concrete, resins and other materials.

MSDS Sheet
Technical Information
DRAGON SKIN 10 FAST
Part no. Size Cost
25171 2 x 1 pint 47.10
25172 2 x 1 gal 304.60
25173 2 x 5 gal 1290.10

DRAGON SKIN 10
VERY FAST

Part no. Size Cost
25284 2 x 1 pint 47.10
DRAGON SKIN 10 SLOW
Part no. Size Cost
25174 2 x 1 pint 47.10
25175 2 x 1 gal 304.60
25176 2 x 5 gal 1290.10
DRAGON SKIN 20
25 MINUTE
Part no. Size Cost
25177 2 x 1 pint 47.10
25178 2 x 1 gal 304.60
25179 2 x 5 gal 1290.10
DRAGON SKIN 30
Part no. Size Cost
25180 2 x 1 pint 47.10

Mold Star® 15, 16, 30 and 20T
1A:1B Mix By Volume Platinum Silicone Rubbers

Mold Star® rubbers are easy to use platinum silicones which are mixed 1A:1B by volume (no weighing scale necessary).
Mold Star® silicones feature relatively low viscosities and vacuum degassing is not required for most applications. The pot life of Mold Star® 15 SLOW is 50 minutes and cure time is 4 hours at room temperature. Mold Star® 16 FAST is a faster material with a 6 minute pot life and 30 minute cure time. Mold Star® 30 is a harder material, with a 30A Shore hardness Mold Star® silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Molds made with Mold Star® will last a long time in your mold library and are good for casting wax, gypsum, resins, concrete and other materials. Cured Mold Star® rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys.
Note: Mold Star® rubbers are not intended for brush-on moldmaking.
Note: This product will not cure against surfaces containing sulfur, even when sealed.

MSDS Sheet
Technical Information

 

Mold Star 15
Slow

Part no. Size Cost
25186 2 x 1 pint kit 47.10
25187 2 x 1 gal. kit 278.00

Mold Star 16
Fast

Part no. Size Cost
25197 2 x 1 pint kit 47.10
25196 2 x 1 gal. kit 278.00

Mold Star 30
45 min

Part no. Size Cost
25189 2 x 1 pint kit 47.10
25194 2 x 1 gal. kit 278.00

Mold Star 20T
Translucent 30 min

Part no. Size Cost
25221 2 x 1 pint kit 47.10

Rebound® 25
Brushable Silicone Rubber Compound

Rebound® 25 is an easy-to-use platinum-cure silicone rubber that self-thickens for making brush-on molds of almost any model. Mixed 1A:1B by volume (no scale necessary), Rebound® 25 can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a soft, flexible rubber (Shore 25A).
Advantages Over Urethane Brush-On Rubber: (a) Rebound® 25 will not stick to most surfaces, so surface preparation is minimal, (b) Two liquids that mix easily together, (c) stands up better to production casting of resins and lowtemperature melt metal alloys, (d) cured molds can be removed from a model “like a glove” and (d) has a long library life.

MSDS Sheet
Technical Information

REBOUND 25
BRUSHABLE
Part no. Size Cost
25190 2 x 1 pint 47.10
25191 2 x 1 gal 304.60
25192 2 x 5 gal 1290.10
REBOUND 40
BRUSHABLE
Part no. Size Cost
25193 2 x 1 pint 47.10
25199 2 x 1 gal 304.60

Ecoflex® Series
Super-Soft, Addition Cure Silicone Rubbers

Ecoflex® rubbers are platinum-catalyzed silicones that are versatile and easy to use. Ecoflex® rubbers are mixed 1A:1B by weight or volume and cured at room temperature with negligible shrinkage. Rubber also cures without a “tacky” surface. Low viscosity ensures easy mixing and de-airing, or you can choose to mix and dispense using our convenient dispensing cartridges.
Cured rubber is very soft, very strong and very “stretchy”, stretching many times its original size without tearing and will rebound to its original form without distortion. Ecoflex® rubbers are water white translucent and can be color pigmented with Silc Pig® pigments for creating a variety of color effects. You can also add Smooth-On’s Silicone Thinner® to further lower the viscosity or add Smooth-On’s Thi-Vex® thickening agent for brush-on application.

MSDS Sheet
Technical Information

ECOFLEX 00-10
1 : 1
Part no. Size Cost
25200 2 x 1 pint 47.10
25201 2 x 1 gal 304.60
ECOFLEX 00-30
1 : 1
Part no. Size Cost
25202 2 x 1 pint 47.10
25203 2 x 1 gal 304.60
ECOFLEX 00-50
1 : 1
Part no. Size Cost
25288 2 x 1 pint 47.10

Equinox® Series
Mix & Apply-By-Hand Platinum Mold Putty

Equinox® Silicone Putty Products are new silicone compounds (platinum catalyst) that can be easily mixed and applied by
hand to a variety of surfaces. Equinox® Putty is mixed in equal amounts (1A:1B) by volume.
Equinox® 35 has a pot life of about 1 minute with a cure time of about 7 minutes at room temperature (73°F/23°C). Equinox®
38 has a pot life of 4 minutes with a cure time of 30 minutes and Equinox® 40 is a slower version with a 30 minute pot life and
5 hour demold time. Shrinkage is low and cured rubber is exceptionally strong (very high tensile strength), durable and will
resist high temperatures (for casting low-temperature melt metal alloys). They also resist cure inhibition. Equinox® Silicones
are also FOOD SAFE and can be used for culinary applications.

MSDS Sheet
Technical Information

EQUINOX 35
FAST
Part no. Size Cost
25204 2 x 1 pint 65.00
25205 2 x 1 gal 393.80
EQUINOX 38
MEDIUM
Part no. Size Cost
25198 2 x 1 pint 65.00
EQUINOX 40
SLOW
Part no. Size Cost
25206 2 x 1 pint 65.00
25207 2 x 1 gal 393.80

Body Double™
“Apply-To-Skin” Mold Making Rubber

Body Double™ “Standard Set” and Body Double™ “Fast Set” are long lasting platinum-cure silicone rubbers that can be applied directly to the skin to make molds of the face, hands and other body parts. The rubber cures quickly and will reproduce perfect detail from any original model – far better detail than any alginate!
One Casting or Many . . . For About The Same Price: unlike alginates, which are good for one only casting, Body Double™ will
last for many castings of almost any material including plaster, Matrix Neo, wax, resins (Smooth-Cast urethanes, polyester, etc.),
Low-temperature melt metal alloys, etc. And the amount of Body Double™ used per mold is less than most alginates, so the cost per mold is about the same. Safety: Body Double™ is non-toxic and odorless.

MSDS Sheet
Technical Information

BODY DOUBLE
STANDARD SET
Part no. Size Cost
25208 2 x 1 pint 69.85
25209 2 x 1 gal 475.60
25210 2 x 5 gal 1962.60
BODY DOUBLE
FAST SET
Part no. Size Cost
25211 2 x 1 pint 69.85
25212 2 x 1 gal 475.60
25213 2 x 5 gal 1962.60
BODY DOUBLE
STARTER KIT
Part no. Size Cost
25219 kit 107.95

Body Double® SILK
Self-Releasing Lifecasting Silicone Rubber

Body Double® SILK is a self-releasing platinum-cure silicone rubber that can be applied directly to the skin to make
molds of the face, hands and other body parts. The rubber cures quickly and will reproduce excellent detail from any original model.
Body Double® SILK will release from closely cropped hair-covered skin surfaces (short beards, moustaches, eyebrows,
pubic hair, etc.). Release cream or Hyperfolic are not needed when using Body Double® SILK. Body Double® SILK will last for many castings of almost any material including plaster, Matrix® Neo®, wax, resins (Smooth-Cast urethanes, polyester, etc.) Body Double® SILK has a working time of 6 minutes and a demold time of 20 minutes*.

MSDS Sheet
Technical Information

 

BODY DOUBLE SILK
Part no. Size Cost
25290 2 x 1 pint 61.50
 

 

     
 
 
Coast Fiber-Tek Products Ltd.
1306 Boundary Road
Burnaby, B.C. V5K 4T6
Tel: 604-294-8116
Fax: 604-294-8754
 
Visa
Interac
Mastercard

© Copyrite 2000 Coast Fiber-Tek Products Ltd. All rights reserved.