Facebook

 


 
Smooth-On Products

** Bulk pricing available upon request.
** Prices are subject to change without notice. All prices are in Canadian funds.
** Applicable taxes are extra .

SMOOTH-ON EPOXIES  
PRODUCT DESCRIPTION COST
XTC-3D® High Performance
3D Print Coating

XTC-3D® is a protective coating for smoothing and finishing 3D printed parts. It does not melt plastic. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D® cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy.

MSDS Sheet
Technical Information
XTC-3D
Part no. Size Cost
25685 6.4 oz. 14.60
25686 24 oz. 34.90
Free Form® AIR
Lightweight Epoxy Putty

Free Form®- Air is an extremely lightweight epoxy putty suitable for an infinite variety of industrial and art-related applications. This is a low-odor, low shrinkage putty that is unique, inexpensive and easy to use. Free Form®- Air is mixed by hand with a 1A:1B by volume mix ratio. It offers a long working time and cures overnight at room temperature to a hard, rigid epoxy that is very strong with modeling board-like properties. Cured Free Form®- Air is so lightweight, it will float in water. It can be sanded, shaped, drilled, tapped and CNC machined/routered. It will readily accept any paint. Free Form can also be color pigmented with SO-Strong® or Ignite® colorants.

MSDS Sheet
Technical Information
FREE FORM AIR
Part no. Size Cost
25697 2 x 1 qt. 41.00
25698 2 x 1 gal. 157.30

Free Form® SCULPT
High Density Epoxy Dough-Crystalline Silica Free

Free Form® SCULPT is a two part sculptable epoxy clay that requiresno firing and will self-cure in a short time to an extremely hard and durable state with virtually no shrinkage. SCULPT is 30% lighter than similar products and holds vertical surfaces better. Users can sculpt larger, stronger pieces with more control over weight distribution. Free Form SCULPT has an ultra fine particle size that gives the user the ability to sculpt finer detail with better precision using tools or shaping by hand. A mirror-like, gloss finish can be achieved by smoothing SCULPT with Free Form® Detailer before it cures. Parts A & B are mixed in equal amounts by hand. Working time is a long 1.5 hours and Free Form® SCULPT cures overnight
to a hard, rigid epoxy that is very strong and waterproof. SCULPT is easily colored by adding SO-Strong color tints to create marble or other effects. Cured putty is easily painted with acrylic paints.
Free Form® SCULPT does not contain crystalline silica (which is a known carcinogen). It can be safely sanded, shaped, and painted.
Used as a repair adhesive, Free Form® SCULPT will bond to itself and a variety of surfaces including wood, metal, glass, stone, and concrete. Free Form® SCULPT will even cure under water.

MSDS Sheet
Technical Information

 

FREE FORM SCULPT
Part no. Size Cost
25692 2 x 1 qt. 35.10
25693 2 x 1 gal. 185.80
Free Form® Detailer

Free Form® Detailer is a low viscosity liquid that makes adding details and detail effects to the surface of Free Form® Sculpt Epoxy Putty easy.

MSDS Sheet
Technical Information
FREE FORM DETAILER
Part no. Size Cost
25699 pint 13.80
Free Form® Habitat Black

Free Form® Habitat® Black Epoxy Putty is a mix-by-hand putty that is used to create textured or highly detailed display pieces. Habitat® Black is solvent-free and contains no VOC’s. Working time is 60 minutes and cure time is 16 hours at room temperature (73°F/23°C). Epoxy cures to a very hard, heat resistant material that is easily painted.
Use with Habitat® Black Folding Powder – fold powder into epoxy putty to thicken and reduce sag when applied to a vertical surface. Folding Powder also reduces stickiness and makes the epoxy more handle-able.
Habitat® Black is suitable for interior and exterior use. It is certified ‘aquarium safe’ and used by aquariums to create hyper-realistic coral and other aquarium displays. Habitat® Black is also used for general sculpting and theming applications.

MSDS Sheet
Technical Information

FREE FORM
HABITAT BLACK
Part no. Size Cost
c/w Folding Powder
25683 2 x 1 pt. 54.00
NO Folding Powder
25684 2 x 1 gal. 188.90
NO Folding Powder
25689 1.5 lb. 16.70
Free Form® Habitat® Fire Safe

Free Form® Habitat® Fire Safe epoxy putty is a high density epoxy sculpting putty that is flame rated (E84, Class A). Habitat® Fire Safe is solvent-free and contains no VOCs. Working time is 90 minutes and cure time is 16 hours at room temperature (73°F/23°C). Epoxy cures to a very hard, flame and heat resistant material that is easily painted. Fire Safe does not contain any carcinogens (cancer causing agents).

Free Form® Habitat® Fire Safe is suitable for interior and exterior theming applications and general sculpting. It is also certified 'aquarium safe' and is used by aquariums and zoos to make hyper-realistic trees, vines, rocks, coral and other display elements.

Use with Habitat® Folding Powder – fold powder into epoxy putty to thicken and reduce sag when applied to a vertical surface. Folding Powder also reduces stickiness and makes the epoxy more handle-able.

MSDS Sheet
Technical Information
FREE FORM HABITAT FIRE SAFE
Part no. Size Cost
c/w Folding Powder
25687 2 x 1 pt. 58.40
NO Folding Powder
25688 2 x 1 gal. 184.75
Folding Powder
25689 1.5 lb. 16.70
EpoxAmite® 101 Fast
Laminating Epoxy

EpoxAmite® 100 Epoxy Laminating System is an easy-to-use liquid epoxy system formulated for a wide variety of fabrication
applications. EpoxAmite® 100 Laminating System is unfilled, low in viscosity, odorless and cures at room temperature. Cured epoxy displays exceptional physical and performance properties. It can be sanded, shaped, machined, drilled, tapped and painted.

Epoxamite 101 Fast Hardener  
MSDS Sheet
MSDS Sheet
Technical Information
EpoxAmite 101 Fast
Part no. Size Cost
25690 1.25 qt. 37.80
25691 1.25 gal. 119.55
EpoxAcast® 655

EpoxAcast® 655 (formerly Metalset® A-30) is a versatile aluminum filled castable epoxy that is very hard and strong. It is dimensionally stable, even when mass cast up to 512 in3/ 8,390 cm3. Different hardener speed options are available depending on your project requirements. Maximum heat resistance is achieved using HT HIGH TEMP hardener (up to 225°F/108°C). Cured EpoxAcast® 655 epoxy has high physical properties and is used for a variety of applications
including making hard tooling, vacuum forming dies/molds, injection molds, foundry patterns, jigs and fixtures and metal forming dies. Depending on project requirements, Part A Base can be mixed with 101 FAST, 102 MEDIUM, 103 SLOW or HT HIGH TEMP hardeners.

EpoxAcast 655 101 Fast Hardener  
MSDS Sheet
MSDS Sheet
Technical Information
EpoxAcst 655
c/w 101 Fast Hardener
Part no. Size Cost
25149 1.5 qt. 56.50
EpoxAcast® 670 HT
High Temp Castable Epoxy

EpoxAcast® 670 HT (formerly 20-136) is an epoxy casting compound which offers high heat resistance up to 350° F/177° C if post cure schedule is used. EpoxAcast® 670 HT features a relatively low viscosity that ensures minimal bubble entrapment.
EpoxAcast® 670 HT also offers an extra long working time of 3 hours. Castings cure with negligible shrinkage and are very hard, very strong and heat resistant. EpoxAcast® 670 HT is ideal for making vacuum form molds, foundry patterns, forming dies & fixtures, hard rollers, industrial parts and high impact tools. EpoxAcast® 670 HT is also
suitable for encapsulation applications or for use as a high temperature epoxy for bonding a variety of surfaces.

MSDS Sheet
Technical Information

 

EpoxAcast 670 HT
Part no. Size Cost
25801 qt. kit 76.50

EpoxAcast® 690
Clear Castable Epoxy

EpoxAcast® 690 is a UV resistant clear casting epoxy that is ideal for making clear jewelry/beads or replacement lenses for kit cars and other applications requiring a rigid, clear finished product.
EpoxAcast® 690 can be colored with SO-Strong® color tints. EpoxAcast® 690 is also suitable for making clear molds and prototype parts. Castings cure with negligible shrinkage and are very hard and strong. EpoxAcast® 690 is also suitable for electronic assembly encapsulation applications where component identification is necessary.
Recommended casting thickness maximum; 2 in. / 5 cm.

MSDS Sheet
Technical Information

 

EpoxAcast 690
Part no. Size Cost
25800 qt. kit 54.75

EA-40® Clear Amber Epoxy
Adhesive and Laminating Resin

EA-40® Clear Amber Epoxy is an unfilled low-viscosity epoxy adhesive that can be spread easily in thin films that are almost transparent after curing. EA-40® has a long pot life and cures in 24 hours at room temperature to provide good mechanical and electrical properties. Mix ratio is 1:1 by volume. When mixed 2A:1B by volume, EA-40® will achieve greater heat resistance and improved physical properties.

MSDS Sheet
Technical Information
EA-40
Part no. Size Cost
25457 2 x 1 qt. 75.90
25458 2 x 1 gal 259.50

EPSILON®
Impact Resistant EPS Foam Coating

EPSILON® is a thixotropic epoxy coating that self thickens for brushing onto a variety of surfaces without sagging. Parts A and B mix together easily, and the mixture wets out uniformly. This product is not sensitive to moisture or humidity.
EPSILON® cures at room temperature to an impact resistant plastic which exhibits good compressive and flexural strength. EPSILON® is color neutral, and cured material can be easily sanded, primed and painted. EPSILON® is suitable for use as a protective, impact resistant coating for EPS or polyurethane foam. It can also be applied to plaster, concrete, wood and fabrics. This product is not sensitive to moisture or humidity and contains no VOC's.

MSDS Sheet
Technical Information

 

Epsilon
Part no. Size Cost
25277 qt. kit 46.30
25276 1.25 gal 138.80

Tarbender®
High Gloss Clear Coating and Encapsulant

Tarbender® is a UV resistant clear liquid epoxy that can be poured over a variety of surfaces to provide a strong, high
gloss coating. Parts A and B mix together and flow easily. Tarbender® epoxy cures at room temperature and offers high
impact resistance.
Tarbender® is an excellent wood bar top coating and can also be poured over plaster, concrete, foam, fabrics, etc. You can
use Tarbender® to encapsulate 3-D objects or coat flat objects, paper and more.

MSDS Sheet
Technical Information

 

TARBENDER
Part no. Size Cost
25278 1.5 qt. 43.65
25279 1.5 gal. 143.60
 

 

     
 
 
Coast Fiber-Tek Products Ltd.
1306 Boundary Road
Burnaby, B.C. V5K 4T6
Tel: 604-294-8116
Fax: 604-294-8754
 
Visa
Interac
Mastercard

© Copyrite 2000 Coast Fiber-Tek Products Ltd. All rights reserved.